Results 1 to 2 of 2
  1. 27-11-2008, 11:38 AM #1
    smpsmp45's Avatar
    smpsmp45
    smpsmp45 is offline VIP Poster
    Join Date
    May 2007
    Location
    India
    Posts
    688
    Rep Power
    17

    USe of water with Chlorine for cleaning coils



    We find that in many places water with Chlorine is used for cleaning. Since there is no absolute control on the concentratiopn factor, the pitting on Al fins & even on SS tubes is seen - Blast freezer coils.

    Is there any other coil configuration other than GI tried out?

    I am also told that in UK they get a special cleaning agent from Levers. Is anyone aware on that?


  2. 27-11-2008, 12:37 PM #2
    Pyr0Beast's Avatar
    Pyr0Beast
    Pyr0Beast is offline improving poster
    Join Date
    Nov 2008
    Location
    Slovenia
    Posts
    34
    Rep Power
    0

    Re: USe of water with Chlorine for cleaning coils

    Clorine causes some damage to the aluminum but it is no way near to cut the 1 or 2 mm's of it ..

    Use a deminerliser when possible.
« Previous Thread | Next Thread »

Similar Threads

  1. Fact or Fiction
    By david.findlay in forum Fundamentals
    Replies: 40
    Last Post: 09-03-2009, 06:19 PM
  2. pure water from air
    By Lc_shi in forum New Technologies
    Replies: 32
    Last Post: 26-02-2009, 12:25 PM
  3. Modifying aricond. for heating, cooling and hot water
    By kimusabi in forum Technical Discussions
    Replies: 3
    Last Post: 10-10-2008, 07:28 AM
  4. open cycle R718 A/C that also provides high purity water?
    By star882 in forum Technical Speculations
    Replies: 7
    Last Post: 27-07-2006, 04:18 AM
  5. Building a wine cabinet
    By Rory in forum Technical Discussions
    Replies: 38
    Last Post: 13-07-2004, 08:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules