Results 1 to 2 of 2
Thread: sorit pi valve operation
-
22-11-2008, 08:55 PM #1
sorit pi valve operation
New member. Working on a sorit-pi valve w/ equalizing line for medium temp. Application. Valve is not feeding. New power element installed, solenoid coil and valve section is working, disassembled and cleaned and inspected internal parts and ports, checked piston and body for any wear. All seems to be ok. No excessive oil in suction line. I have it front seated while new repair kit is ordered. Is there something that i might have missed?
-
22-11-2008, 09:56 PM #2
Similar Threads
-
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
R22 Flooded System - Trawler
By chiefbecker in forum System OptimizationReplies: 18Last Post: 07-02-2008, 11:11 PM -
Service Procedures For TK Scroll
By absolute-zero in forum TransportReplies: 0Last Post: 03-02-2008, 07:42 PM -
Benji
By benji in forum Trouble ShootingReplies: 29Last Post: 30-01-2008, 01:25 PM -
Valve "Hunting"
By Abe in forum Trouble ShootingReplies: 20Last Post: 21-01-2002, 12:29 AM