Door Gaskets

[cooltec guy]

Does anyone know if there is a company out thre who supply door seals for all brands or one that will make to order ?

[Testech]

What make and model of equipment do you need door seals for ?.

I used to purchase door seals for engineers.

Remember you have different types of gaskets...Colour, Shape, Fitting etc

Arrow Push Fit - Square Push Fit - Secured by Screws and plate etc.

Climate can get hold of certain gaskets, remember to get full spec of equipment including date of manufacture etc.

[folco]

looking for door gasket for Foster gastronorm'90 size 611mmx1560mm any body know how to fit one?

[Andy AC]

You can get the seals direct from fosters relatively cheap. They are a push in type, nice and easy to change.

Andy

[Electrocoolman]

Just quote foster the model and serial number and the correct gasket will arrive.

[folco]

Cannot find serial or model number.The gaskets on their spares site are not the size I am looking for.Does anybody know where to look for serial or model number.Cannot not see it anywhere on outside.

[folco]

Thanks for info

[Andy_CTC_Ref]

with fosters theres normally a plate on the top right hand side inside the cabinet, if its not been worn away.

[Chunk]

If you measure from the outside to outside,width and length,find out if it is push fit and whether it is magnetic,give details to Foster and they will be able to help you.

Have done it to them too many times and they have been very helpfull.(even on 20 year old cabinets)

[folco]

If you measure from the outside to outside,width and length,find out if it is push fit and whether it is magnetic,give details to Foster and they will be able to help you.

Have done it to them too many times and they have been very helpfull.(even on 20 year old cabinets)

thanks guys will do as you say with fosters,good luck and stay chilled!!!