Results 1 to 2 of 2
Thread: Glycol!?!
-
18-11-2008, 07:02 PM #1
Glycol!?!
Hi All, i'm currently commissioning an ht pack at a supermarket, all standard stuff, but it has a heat exchanger in the discharge heating glycol, pumped through ceiling cassettes for heating. My question is simply, what is the proceedure for charging the glycol, and does it have to be bled? it has a dosing pot and a pressurisation unit.
Cheers
Chillled
-
18-11-2008, 07:33 PM #2
Re: Glycol!?!
A liquid system needs venting.
Check the pipework to see if any AAVs have been fitted at the high points, life may get easierBrian - Newton Abbot, Devon, UK
Retired March 2015
Similar Threads
-
glycol charts
By Feargal Loy in forum Technical SpeculationsReplies: 2Last Post: 28-03-2010, 03:19 AM -
glycol cooling system for soft dring
By faryuki in forum NH3Replies: 14Last Post: 21-04-2007, 03:44 PM -
Milk getting into glycol on chill press
By balerjoe in forum Trouble ShootingReplies: 16Last Post: 06-09-2005, 09:41 PM -
Glycol water valves
By eng_ab in forum IndustrialReplies: 2Last Post: 03-06-2005, 09:15 PM -
which glycol to use ?
By dchatta in forum RefrigerantsReplies: 4Last Post: 12-07-2004, 09:26 AM