Results 1 to 3 of 3

Thread: Saying Hello

  1. #1
    wittiem's Avatar
    wittiem Guest

    Talking Saying Hello



    Well I found this forum completely on accident when doing some searching for single stage phase change systems and since I'm always looking for more ways to learn about refrigeration in order to build my own I decided to register. Well below I will list the specs of the components I've chosen/found available and I will try to get photos up as soon as I can.

    Compressor: Danfoss NF7FX
    Condensor: 6"x6"x4.5" cube condensor
    Evaporator: Kayl evap with mounts
    Tubing: 10' 1/4" copper tubing
    10' of 3/8"
    10' 0.031" captube
    4' of copper flex tubing from Under-the-Ice
    5/16" copper studs for flex line
    spun copper filter/dryer

    My plan was to run R507a and for this system to be a learning basis so that I can build a few more units before attempting to possibly build a cascade system in the future.



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Saying Hello

    Hi and welcome to the forum, enjoy
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Jul 2010
    Location
    usa
    Age
    40
    Posts
    16
    Rep Power
    0

    Re: Saying Hello

    thank you for you here

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •