Results 1 to 4 of 4
Thread: drier positions
-
08-11-2008, 07:41 AM #1
What would be the drier (silika) positions ( Angles) in commercial refrigeration Low temp. application products like Refrigerator, Freezer etc. with different gases like R-12, R-134a, hydro carbon etc.
Last edited by chillin out; 09-11-2008 at 08:36 PM.
-
08-11-2008, 09:45 AM #2
Re: please explain me..
Hi,
Laminar flow units are used in pharmaceutical cleanrooms industry.
As the name suggest Laminar flow needs to be maintained across the booth in order to maintain Class 100 i.e. ISO Class '5'.
This calls for laminar flow nowadays also referred as unidirectional flow in Reverse laminar airflow units (RLAF).
This laminar or unidirectional flow is obtained by maintaining 90FPM velocity across the crossectional area of the LAF.
ThanksVijay Kumar
HVAC Design Engineer
BMCPL
"The more you sweat in peace less you bleed in war"
-
08-11-2008, 08:55 PM #3
-
09-11-2008, 08:23 AM #4
Similar Threads
-
Filter Drier
By grego in forum New TechnologiesReplies: 6Last Post: 30-05-2008, 08:32 PM -
suction line drier.
By Joeheath in forum Air ConditioningReplies: 5Last Post: 10-04-2008, 08:59 PM -
Drier
By Vincent Yu in forum FundamentalsReplies: 6Last Post: 07-02-2006, 03:02 AM -
Shelf life of an uncapped dessicant drier.
By eberg in forum Air ConditioningReplies: 2Last Post: 22-08-2001, 01:22 PM -
Drier Position
By subzero*psia in forum CommercialReplies: 8Last Post: 23-07-2001, 10:28 PM