Results 1 to 6 of 6
  1. #1
    Join Date
    Oct 2009
    Location
    England
    Age
    42
    Posts
    11
    Rep Power
    0

    Cool Zanussi Refrigerated table



    Hi

    I have a Zanussi Refrigerated table (MNo. 9YTX 113163 04) whihc has stopped working. It is showing an error code E2, I have tried getting in touch with Zanussi/Electrolux but they keep telling me they only deal with their approved service providers.
    After some investigating I found the thermal protection switch for the compressor is faulty. To prove this I bypassed it and the system seems to cool but the error code stays.
    It could simply be an error telling me the fridge temperature is to hi but I'm loathed to leave it running with the protection bypassed incase there is another problem.

    Does anyone have a list of error codes or any other advice that might help.

    Ian



  2. #2
    Join Date
    May 2006
    Location
    Isle of Wight, Uk
    Age
    47
    Posts
    425
    Rep Power
    20

    Re: Zanussi Refrigerated table

    The code will most likely be a probe fault, t/stat or evap depending on controller manufacturer, and not related to the compressor fault. Check condenser coil is clean, compressor starting gear and running amps of comp.

    Andy

  3. #3
    Join Date
    Mar 2001
    Location
    ireland
    Age
    53
    Posts
    1,471
    Rep Power
    41

    Re: Zanussi Refrigerated table

    Post a pic of the controller, is it an elliwell?

    al
    Mostly found in the southern part of this green and pleasant land.

  4. #4
    Join Date
    Oct 2007
    Location
    manchester
    Age
    50
    Posts
    5,707
    Rep Power
    45

    Re: Zanussi Refrigerated table

    e2 is evap probe fault/short
    e1 is cabinet temp probe
    evap probe will be stuck in the evap fins, sensor will cost around 15quid, to test this,disconnect both probes from the controller and test the resistance accross the 2 thermistors if different then probe fault,if similar then dry joint or cable damaged usually resistance is from 1000 ohm to 15000 ohms depending on temperature.

    get a new klixon for your compressor,clean the condenser coil and confirm the cond fan runs

  5. #5
    Join Date
    Mar 2001
    Location
    ireland
    Age
    53
    Posts
    1,471
    Rep Power
    41

    Re: Zanussi Refrigerated table

    Monkey's robbed all me rep points, i can't give him any more!!

    al
    Mostly found in the southern part of this green and pleasant land.

  6. #6
    Join Date
    Oct 2007
    Location
    manchester
    Age
    50
    Posts
    5,707
    Rep Power
    45

    Re: Zanussi Refrigerated table

    ill gladly accept ur lil green square al haha
    Quote Originally Posted by al View Post
    Monkey's robbed all me rep points, i can't give him any more!!

    al

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •