Results 1 to 4 of 4
Thread: Sanyo fault codes
-
31-10-2008, 07:39 PM #1
Sanyo fault codes
Hi all,
Had a look at the following Sanyo today, (R410a fixed speed, March 2005)
Indoor: SAP-KR224EH
Outdoor: SAP-CR224EH
Operation lamp blinks on/off continuesly (no pause) and red standby light on. Is there a way of retrieving fault codes via the infra red controller?
Took the facia off, could not see any led's on the indoor board, checked interconnecting wiring seemed ok.
Have sourced a Sanyo phone number, also have an account with Ocean Air, do they have a Sanyo tech help?
Any help appreciated,
-
31-10-2008, 10:12 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Sanyo fault codes
Either indoor room thermistor or indoor fan motor is defective.
-
03-11-2008, 08:23 AM #3
-
03-11-2008, 08:02 PM #4
Re: Sanyo fault codes
I advice you to look for the manual here
http://www.oceanairdist.co.uk/contra...anyo/sanyo.php
Similar Threads
-
sanyo fault codes
By airconadam in forum Air ConditioningReplies: 2Last Post: 04-02-2008, 02:45 AM -
sanyo a/c unit fault codes
By dougie in forum Air ConditioningReplies: 2Last Post: 30-11-2007, 01:31 AM -
standardisation of fault codes?
By kelvin kline in forum Air ConditioningReplies: 1Last Post: 10-10-2007, 12:30 AM -
sanyo fault codes
By Jase in forum Air ConditioningReplies: 6Last Post: 24-10-2006, 07:34 PM -
MHI, Sanyo & Fuijitsu Complete Fault Codes
By aeb200 in forum Air ConditioningReplies: 1Last Post: 16-11-2005, 01:11 PM