Page 5 of 12 FirstFirst 123456789101112 LastLast
Results 201 to 250 of 596
  1. #201
    Join Date
    Sep 2006
    Location
    england
    Posts
    285
    Rep Power
    18

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi



    what was fault



  2. #202
    eddy's Avatar
    eddy Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Central18 Indonesia

  3. #203
    reefercr's Avatar
    reefercr Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    HI i have a problem wit a unit CF-II M37.5 TK i have operation manual but i need parts manual does anybody have this manual my email is rosmel.fernandez@gmail.com

    thks a lot

  4. #204
    Jackwolodk's Avatar
    Jackwolodk Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi!
    I'm first time here and I see,that U can help me.I'm working on Thermoking Mp3000 and the problem is that the indoor fans are running only on low speed on cooling mode.On heating is ok.What can be wrong,something with settings or board.
    Thanks for any help
    Jack

  5. #205
    reefercr's Avatar
    reefercr Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by Jackwolodk View Post
    Hi!
    I'm first time here and I see,that U can help me.I'm working on Thermoking Mp3000 and the problem is that the indoor fans are running only on low speed on cooling mode.On heating is ok.What can be wrong,something with settings or board.
    Thanks for any help
    Jack

    Hi friend

    your problem could be on relay board or evap fan relays you could first try to replace relays if this doesnt owrk replace relay board and the last steps it is to replace controller

    best regards

    rosmel.fernandez@gmail.com

  6. #206
    Jackwolodk's Avatar
    Jackwolodk Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi
    I replaced relays already and it's the same,i have a small green light beside low speed relay also board? where is the signal coming from to activate that relays,i don't have any drawings?
    Thanks
    Jack

  7. #207
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    From MP3000 manual;

    CRR models are equipped with either 2 or 3
    evaporator fans. All models feature 2-speed
    motors. The evaporator fans operate continuously
    to circulate air inside the container. The fans
    operate on high speed for perishable cargo at
    setpoints of -9.9 C (14.1 F) and above. At
    setpoints of -10 C (14 F) and below, the
    evaporator fans operate on low speed for frozen
    cargo.
    NOTE: If Economy Mode is ON:
    Chill Loads: Evaporator fans operate on low
    speed when container temperature is in-range.
    Frozen Loads: Evaporator fans stop during the
    Null mode; controller operates fans on low speed
    for 5 minutes every 45 minutes.

  8. #208
    obet's Avatar
    obet Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hi reeferman recently bought crr 40 when put in to power lcd say " emergency program" and the alarm lights is blinking pushing f4 and f3 no response what would be the problem thanks

  9. #209
    reeferleh's Avatar
    reeferleh Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by obet View Post
    hi reeferman recently bought crr 40 when put in to power lcd say " emergency program" and the alarm lights is blinking pushing f4 and f3 no response what would be the problem thanks
    Hi, did you check if the keyboard is correctly connected behind the mp3000?( blue connector)

    often, this trouble appear after the replacement of mp3000 at the first start.

  10. #210
    obet's Avatar
    obet Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reeferleh View Post
    Hi, did you check if the keyboard is correctly connected behind the mp3000?( blue connector)

    often, this trouble appear after the replacement of mp3000 at the first start.

    hi, all power relay replace with new one and the keypad we put also new one but the same problem " emergency program"

  11. #211
    phathi's Avatar
    phathi Guest

    Cool Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    ...................

    reefer mechanic
    i need thermoking reefer modl sb 210 wiring & parts manul

  12. #212
    Join Date
    Aug 2010
    Location
    izmir
    Posts
    38
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    gd my frend

    my problem alarm code 78 and 77 - 74 - 50 what can i do this for problem

  13. #213
    Liam Owens's Avatar
    Liam Owens Guest

    Smile Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi Reefermechanic,

    I'm new to this section, I used to work in the semiconductor industry maintaining/repairing chillers and heat exchangers for process Tools, I'm looking to get into this area now and was asked to look at 2 trailer units 1 was a Carrier Vector 1800 with a logicold printer unit and the other was a Thermoking SL-200e with a thermoguard VI b , Can you provide if possible any service,maintenance and operator manuals for both units.Can you tell me if possible again a list of common faults fixes, You seem to be the guy to go to

    Many thanks
    Liam

    email : liamowens1@gmail.com

  14. #214
    Join Date
    Jan 2008
    Location
    qatar
    Age
    51
    Posts
    61
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    thank u reefer mechanic to ur pdf files

    TRY TO LEARN MORE ABOUT A/C SYSTEM

  15. #215
    Join Date
    Sep 2010
    Location
    puerto rico
    Posts
    6
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    On a recent trip i had this problem. I was on a ship and had a carrier reefer that had a bad smv valve ( would only open 27%). I didn't have a spare on board so I took the valve apart and removed the piston as the manual said. Well while trying to adjust the temp with the suction service valve i encountered the following problem. The discharge pressure would go so high that it kept opening high pressure cutout switch. I had the suction valve almost closed then the pressure would go almost to the cutout limit and then back on and of while the temp would go down only during the period when the discharge pressure was going from high to low while average temp was going slowly up. I noticed that the quench valve kept closing and opening all the time. Now i always thought that when the smv is fully open the quench valve is suppose to remain shut. I keep wondering what did i do wrong and what was the problem.

  16. #216
    luck's Avatar
    luck Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    I got a recorder sram, with downloads in containers ML3 carrier, I would help of someone who knows how to write the cards

  17. #217
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    HZU - sounds like you got air in the system when u took out the SMV guts. did you evacuate the low side? Just because the SMV opens to 27% doesnt mean its bad. Its there to control a bunch of factors so you have to account for all of them What was the ambient temperature?

  18. #218
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by obet View Post
    hi, all power relay replace with new one and the keypad we put also new one but the same problem " emergency program"
    Quote Originally Posted by obet View Post
    hi reeferman recently bought crr 40 when put in to power lcd say " emergency program" and the alarm lights is blinking pushing f4 and f3 no response what would be the problem thanks

    Hi obet

    I think you have solved the your problem. If you have
    not resolved the problem of, you have to check cable2. Cable2 is defective,the unit works in case of emergancy mode. I hope it helped.


    Best wishes

    Reefermechanic

  19. #219
    Join Date
    Feb 2010
    Location
    N.Ireland
    Posts
    16
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi Reefermechanic have a customer with a TKSMX11SR showing fault codes 22 & 24 any clues or link to service manual for unit my e mail is cu2chat@aol.com

  20. #220
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Luck

    Contact your service engineer and he can write the cards for you. Go to http://www.container.carrier.com

  21. #221
    Ghostsurf's Avatar
    Ghostsurf Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hi guys!
    i recent encounter with magnum plus MP 4000 with alarm 120! i checked the LPT reading! all are normal and identical with pressure guage reading! now i want the magnum plus service manual for MAGNUM-SL211. my email add. is e.ghostsurf@gmail.com. i am from singapore. now i need urgent this manual. thx in advance guys! cheers!
    ghostsurfer!

  22. #222
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Suction Pressure Sensor
    • Indicate a problem exists with this sensor or its
    wiring. The sensor is reading out of the range, or
    appears to be open or shorted
    PTI Test
    • Reading did not decease by 0.15 bar (2.175 psi)
    between compressor on and off
    • Check wiring to be correct and connected
    • Check J1 plug is plugged into MRB
    • Check voltage at J1 pin7 to be 0.5 – 4.5 volts

  23. #223
    dimitar7005's Avatar
    dimitar7005 Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi reefermechanic,
    I need a service and operations manual for Thermoking SL-100
    Thanks in advance
    My e-mail dim_karaslavov@abv.bg

  24. #224
    Bobby Weis's Avatar
    Bobby Weis Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    In Afghanistan, I have a carrier reefer model # 69NT40-541-302 a alarm code of 15 pop up and its not in the manual. Can someone tell me what it is and to look for.

  25. #225
    Pavelski's Avatar
    Pavelski Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Good day I am overheating problem with a compressor in a cargo container termoking cfIIm19, the gas temperature is too high and Retoño compressor overheating, what can I do

  26. #226
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by Bobby Weis View Post
    In Afghanistan, I have a carrier reefer model # 69NT40-541-302 a alarm code of 15 pop up and its not in the manual. Can someone tell me what it is and to look for.
    My guess is that the software has been updated so one would just 'look' forward in model numbers till your alarm number shows.

    Try 551s

    http://www.container.carrier.com/Car...rature/Manuals

  27. #227
    ambay.francisco's Avatar
    ambay.francisco Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hello,
    Can anybody help me???..I worked in afghanistan and today I encountered an alarm E-107 in my Mitsubishi CPE53-3BAIIIFU reefer container and the reefer controller was strucked-up...please reply me to my email ambay.francisco@gmail.com,thanks in advance....




    hi iceman uk here what is the weather like and any jobs i am a reefer expert with 25 years knowledge wanting to escape to sunny happy times[/quote]

  28. #228
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Ambay, here's a link to the Mitsubishi site.

    http://truck.mhi.co.jp/gen/acrmw/service/

  29. #229
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hey Bobby

    Alarm 15 is loss of cool...its probably out of gas. find the leak and fix it.
    if its got good gas look to see if any if the SMV wires have rubbed through behind the compressor.

  30. #230
    jt288207's Avatar
    jt288207 Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Can anyone tell me what needs to be changed on sb2 tk unit if i want to change gass from r401b to r404a

  31. #231
    Join Date
    May 2008
    Location
    New Zealand
    Posts
    35
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hi there Guys, I was wondering if anyone could help me . I have been working on a carrier 69NT40-511-353 reefer. It keeps failing the PTI (Auto 2) for a P1(heater check). I have carried out an insulation resistance check on the defrost heaters and have replaced 2 heaters. Put thru P1 test again with the same result. Might mention that it passes the rest of the Auto 2 PTI which includes the P9 defrost test. I have repalced the controller and it still faults. Also reconfigured the controller with the latest software (5148) and also reloaded the correct configuration to see if it was corrupt.
    Have now gone ahead and replaced the current sense transformer still no change. Have carried out a current test with the box on defrost and the currents are all ok, the ML2I is reading the current and it is ok . Have reterminated and checked the wiring of the defrost heaters and all appears ok.

    I am at a loss now as the container came in with the fault from another port and it really needs to be repaired

    The unit doesnt put up any alarm codes so there are no clues there.

    any help would be very much appreciated

  32. #232
    Join Date
    May 2008
    Location
    New Zealand
    Posts
    35
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hi there Ambay, the E107 alarm is telling you the SRam on the main control board is faulty or has an error. you can try and do a factory reset by turning the container off and and turning on the

  33. #233
    Join Date
    May 2008
    Location
    New Zealand
    Posts
    35
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    soory about the last post,

    to continue

    no 6 dip switch which is located on the back of the controller door. now turn on the box and see if this has cleared the alarm. You may have to input the box details again .eg. container number, model number,etc. It has been a while since I have done this and cant quite remember if you have to reconfigure the controller with a laptop

    there is not really a lot of info on Mitsi boxes

    hope this helps

  34. #234
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    i think i would avoid telling rookies about how to factory clear.
    In regards to your heat issue. Did you check the obvious like the contactor points etc? also check the wires from the Current Sensor (3 small wires brown blue black) as they go into the controller and the spade connections above the CFM contactor. They are always loose. Clean the pins on the controller connection as well.

  35. #235
    Join Date
    May 2008
    Location
    New Zealand
    Posts
    35
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi there Bruisermac

    Thanks for the reply, I have replaced the current sensor with a new one that has the harness from the sensor to the micro that doesnt have and joins or connectors in it. the contactor is ok as the current draw both sides of the contactor are the same and the contactor is new.

    I will try the cleaning of the pins and see if that makes a difference

    cheers

  36. #236
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi Phil, double and triple check the leads that go from main breaker to CC.

    They MUST match wiring diagram exactly.

  37. #237
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    i think i have replaced 1 carrier current transformer in my 15 years...pretty reliable part.

  38. #238
    Join Date
    May 2008
    Location
    New Zealand
    Posts
    35
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hi there guys just a follow up. I have checked all the wiring and now have found the container was originally wired for 6 heaters. It has been converted to 4 heaters and a drain pan heater (total 5) this is after talking to carrier about it due to icing up problems in the drain pan. I checked all the wiring in the control box. and also the routing of the wiring between the circuit breaker and thru all the contactors.

  39. #239
    akhtar nadeem's Avatar
    akhtar nadeem Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hello pls tell me about starcool cantainer plant mostly coming problems thanks

  40. #240
    Join Date
    Jan 2010
    Location
    kosova, prishtina
    Age
    43
    Posts
    5
    Rep Power
    0

    problems with daikin container

    hi there,
    I have a problem with daikin container year of produc. 2007, runs with r134-a, scroll comp. first it was low press. alarm, ive changed filter dryer, refilled and it has start to run properly after a while it has start to show me abnormal heat on high press, now the comp, just start for a min and stops. some manuals or sugestions could help me a lot.

    best regards.

  41. #241
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    interfrigo_cuki, see post #76 in this thread.

  42. #242
    ron21gallosa's Avatar
    ron21gallosa Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hello to everyone,

    need manual for thermoking cfii unit with uPA+ controller

    tnx and regards!
    ron21gallosa yahoo.com

  43. #243
    Luisillo's Avatar
    Luisillo Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by abbsnowman View Post
    Hi reefermechanic and welcome.
    I think your calling truck / trailer units container units. On this side of the pond, container reefers are "sea going" containers.
    One last thing, you may get some flack for offering manuals here. If you decide to help someone this way, it's best to email them with the offer.
    I apreciate your wanting to help but some others may not.
    Cheers
    Abbs
    por favor me podrias mandar tambien los manuales, ya que soy nuevo en esto, te lo agradeceria.

  44. #244
    Luisillo's Avatar
    Luisillo Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Help, need wiring diagram SBII, SBIII, imail luisfelipevac@hotmail.com

  45. #245
    vinodvikraman's Avatar
    vinodvikraman Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi
    Can let me know the backpressure of thermoking (-20C)

  46. #246
    Join Date
    Dec 2010
    Location
    Philippines
    Age
    33
    Posts
    30
    Rep Power
    0

    Smile Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hi i am new member of reefer mechanic....hi to all

  47. #247
    coldpost's Avatar
    coldpost Guest

    Exclamation Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by aku View Post
    Hello Everybody.
    In my country haven't any freezer container and unit factory.
    But I am researching to cooperate company who can supply to us freezer container. But, I need to know which way is better?
    1st. We will studying workers then installing. /of course we must to purchase reefer machine like a Termo king, Daikin .... etc./
    2nd. We will purchase completely product freezer container.
    Actually our country is very cold in winter and summer time is very hot. So reefer machine must be work -40 +40C. And my countries climate dry. So reefer machine must be work in bad climate like a storm.
    Please tell me, which companies reefer machine much suitable in my country? and how teach my worker?
    oh there is one offer about installation inner and outer of container?

    Best Regards
    Ariunbold.Ts
    Hi Ariunbold,
    In response to your need to supply a reefer able to maintain -40oc / +40oC, e-mail me:
    info@refrigeratedcontainersupplies.co.uk

  48. #248
    coldpost's Avatar
    coldpost Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by aku View Post
    Hello Everybody.
    In my country haven't any freezer container and unit factory.
    But I am researching to cooperate company who can supply to us freezer container. But, I need to know which way is better?
    1st. We will studying workers then installing. /of course we must to purchase reefer machine like a Termo king, Daikin .... etc./
    2nd. We will purchase completely product freezer container.
    Actually our country is very cold in winter and summer time is very hot. So reefer machine must be work -40 +40C. And my countries climate dry. So reefer machine must be work in bad climate like a storm.
    Please tell me, which companies reefer machine much suitable in my country? and how teach my worker?
    oh there is one offer about installation inner and outer of container?

    Best Regards
    Ariunbold.Ts
    Hi,
    If you need a reefer container able to maintain -40oC to +40oC , e-mail me:
    info@refrigeratedcontainersupplies.co.uk

  49. #249
    Join Date
    Apr 2009
    Location
    Davao City,Philippines
    Age
    41
    Posts
    6
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hello everyone!
    does anyone have manuals for starcool and the carrier primeline? I am a Reefer Technician working in Dole Philippines. we come across these reefer units but we dont have manuals. any help is appreciated. email me vans@hot-shot.com.

  50. #250
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    ALL of Carriers container manuals are on their website.

    Edit; Same with the Starcool.
    Last edited by Will; 27-12-2010 at 07:52 PM.

Similar Threads

  1. Container Reefer Unit for Controlled Atmosphere (CA)
    By reeferman in forum New Technologies
    Replies: 9
    Last Post: 26-08-2011, 09:26 AM
  2. Replies: 12
    Last Post: 27-03-2011, 04:12 AM
  3. Help cutting open 40ft reefer, we now have problems
    By adrian_uk17 in forum Industrial
    Replies: 50
    Last Post: 28-11-2010, 09:11 AM
  4. Reefer container
    By stevec in forum Commercial
    Replies: 2
    Last Post: 25-01-2009, 06:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •