Page 2 of 12 FirstFirst 123456789101112 LastLast
Results 51 to 100 of 596
  1. #51
    kumar_lk001's Avatar
    kumar_lk001 Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi



    hi guys i am new here so pls excuse me but i am intrested in buying a small 3 tonne hino truck with an older thermoking md-1 Fuelsaver the hours shown are 2202 hrs . do you guys know anything about the reliability and dependability of these tks and would you pls let me know what i got to look for as this is my first truck and i want it to last a while



  2. #52
    hassan60's Avatar
    hassan60 Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    Hi All,

    I m senior reefer technician.İf you have got any problem about reefer container units . i will be here....

    All the best.
    Dear mec

    I have got many problems in different type of reefers can u give me your mobile number my is 00967733762011

  3. #53
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    RTE or Eriksson for the controller

  4. #54
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    ...................................
    Last edited by reefermechanic; 27-02-2013 at 09:52 AM.

  5. #55
    Join Date
    May 2009
    Location
    USA
    Age
    53
    Posts
    8
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    I have a carrier Phoenix Advantage that I recently purchased. It's on a wreck that laid on it's side. It starts and runs good, blows cold, but the out of range light stays on and the numbers on the display keep counting down continuously, and I can't set temp. Any help would be greatly appreciated.
    Thanks, Art

  6. #56
    Join Date
    May 2009
    Location
    USA
    Age
    53
    Posts
    8
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    Hi All,

    I m senior reefer technician.İf you have got any problem about reefer container units . i will be here....

    All the best.
    I have a carrier Phoenix Advantage that I recently purchased. It's on a wreck that laid on it's side. It starts and runs good, blows cold, but the out of range light stays on and the numbers on the display keep counting down continuously, and I can't set temp. Any help would be greatly appreciated.
    Thanks, Art

  7. #57
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hey art

    you need trailer guys for that problem...this is the container reefer side of the industry...plus units dont usually run very well on their sides. may sound like alot of problems

  8. #58
    Join Date
    Apr 2009
    Location
    viet nam
    Age
    47
    Posts
    6
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi PRO Reefer Mechanic,

    I have problem with download data of daikin reefer machine, LXE-10D, have you send for me software DCCS new version. thank. email: pacificocean.info@gmail.com

  9. #59
    Join Date
    Apr 2009
    Location
    viet nam
    Age
    47
    Posts
    6
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi reefermechanic,

    I have some problem with download data of reefer machine carrier and daikin, can you send for me software? thank
    pacificocean.info@gmail.com

  10. #60
    RDan's Avatar
    RDan Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi all,
    I am new in this business and i feel lost right now, can someone give me carrier and tk software and connection cable specification ???
    Thank You !!!

  11. #61
    saleemsalem's Avatar
    saleemsalem Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi senior mec
    Need the manuals for Daikin (all models) and Thermoking (smart reefers) Service Manuals.
    Regards

  12. #62
    OttiliPY's Avatar
    OttiliPY Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hallo to all...
    I'm new at this comunity and i'm so happy to have found you. I have a problem with a refeer container. Its an older one (1989) build by Graaff Germany, and it has Carrier Transicold machinery.
    The problem is: it starts cooling fin until it reaches -3ºC. At that temp. it just turns off completely. Even the display turns off. It will eventually turn back on by it self after 15 min... How can i fix that..?
    Do you have the instructions manual for that one?
    Please help...
    model nº.: 69NT40-394-9
    Regards
    Alex

  13. #63
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by OttiliPY View Post
    Hallo to all...
    I'm new at this comunity and i'm so happy to have found you. I have a problem with a refeer container. Its an older one (1989) build by Graaff Germany, and it has Carrier Transicold machinery.
    The problem is: it starts cooling fin until it reaches -3ºC. At that temp. it just turns off completely. Even the display turns off. It will eventually turn back on by it self after 15 min... How can i fix that..?
    Do you have the instructions manual for that one?
    Please help...
    model nº.: 69NT40-394-9
    Regards
    Alex

    Hi OttiliPY.

    I donn t see like this model since a few years..Its very old but i think its working still

    First you have to check to the "board,timing and current control".Usually somethings may burning on this card.I hope you will find problem..

    Good luck

    Reefer Mechanic.

    Attached Images Attached Images

  14. #64
    didouwind's Avatar
    didouwind Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hey man isee u are so genirus in dis forum so iwant ducement about thermoking instalations and dats my email didou_wind@yahoo.fr


    thank's man

  15. #65
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by didouwind View Post
    hey man isee u are so genirus in dis forum so iwant ducement about thermoking instalations and dats my email didou_wind@yahoo.fr


    thank's man

    hi didouwind ,

    what you wants??Manual??

    see you

    reefer mechanic

  16. #66
    OttiliPY's Avatar
    OttiliPY Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    Hi OttiliPY.

    I donn t see like this model since a few years..Its very old but i think its working still

    First you have to check to the "board,timing and current control".Usually somethings may burning on this card.I hope you will find problem..

    Good luck

    Reefer Mechanic.

    Thanks a lot... I`ll check that out.
    Still, i would need the installation manual, or the programming procedures. Yeah that thing is pretty old, but as you guessed, its still in a good shape. Despite this little problem...
    Gracias dude...

  17. #67
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    hi all,

    i m senior reefer technician.İf you have got any problem about reefer container units . I will be here....

    all the best.
    tanks may tetsher i have probleme in refeer daikin al 803 the are to possibility for this alarm f107 or f 109 but t dont know the solution about this alarm plz thank you mester

  18. #68
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    tanks may tetsher i have probleme in refeer daikin al 803 the are to possibility for this alarm f107 or f 109 but t dont know the solution about this alarm plz thank you mester

  19. #69
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    I have probleme in daikin refeer al 803 plz what a wil doing plz mau prof
    mu email/ hichamviolon@hotmail.com

  20. #70
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    hi terminal,

    first you have to check all control fuses..than you have to check eev(electronic expansion valve..

    You have to check lpt (low pressure transducer) on select menü..if low pressure goes to down side quickly eev was failured.how can you check to eev?you have to take out eev coil body.if low pressure comes to up side eev coil problem when take out eev coil..

    Good luck...

    Reefer mechanic.
    yes my prof some times i tchek the eev is good end when i make of in the reffer end make on it work normal end in rang but after 3hour or 2hour the some probleme unite stop al 803 .thenks

  21. #71
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    yes my prof some times i tchek the eev is good end when i make of in the reffer end make on it work normal end in rang but after 3hour or 2hour the some probleme unite stop al 803 .thenks

  22. #72
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Thankyou my teacher
    for al803 i know that it is acause the 107 or 109 to 10 times.
    All fuse are ok
    servo motor running eev ok
    what a did i make reefer off end on then he travel normal byt after time reefer out of rang end al e107 or e 109
    plz help me because i have 3 reefers in terminal morocco
    thanks

  23. #73
    OttiliPY's Avatar
    OttiliPY Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hallo again...
    After checking the electronic cards of my container, we got it running. Now there are some simple things i donto know.
    On the control board are some switches wich i dont know what they do. I'm sure you can help.
    What is the "HCS" switch for...? What does it do?
    What does the "TDS" button...?
    What is the "TSS"...?
    What is "SDS"...?
    All these switches are for something. Please explain them to me...
    I'm blind here...

  24. #74
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by terminal View Post
    some times i tchek the eev is good end when i make of in the reffer end make on it work normal end in rang but after 3hour or 2hour the some probleme unite stop al 803.
    Check for moisture/h2o in EEV between stem and valve body.

    Important you get area in green arrow clean (blow off this part 'pic' #3)

    See attachments below.
    Attached Images Attached Images
    Last edited by Will; 23-07-2009 at 03:24 AM.

  25. #75
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    .................................
    Last edited by reefermechanic; 27-02-2013 at 09:54 AM.

  26. #76
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by Will View Post
    Check for moisture/h2o in EEV between stem and valve body.

    Important you get area in green arrow clean (blow off this part 'pic' #3)

    See attachments below.
    THANK YOU PROFESSOR AND FOR YOUR HELPEND Gentille
    REALLY I NEED YOU FOR ADVICE OF REEFERS PROBLEMS .thank you
    IF THAT possibl TO still be contacted my email : troytroy@live.fr
    THANKS

  27. #77
    Join Date
    Nov 2008
    Location
    Indonesia
    Posts
    9
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi All,
    I have problem with my laptop are can't connect communication when used for Carrier container unit/launch pad.
    Detail model are acer TravelMate 6292.
    Cause the port using usb port so i using serial adpter to joint cable communication with my laptop.
    Is it cause that adapter so communication become interupt?or any other suggest

    Any kind of response will be highly appreciated

    Thank you

  28. #78
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by faruq View Post
    Hi All,
    I have problem with my laptop are can't connect communication when used for Carrier container unit/launch pad.
    Detail model are acer TravelMate 6292.
    Cause the port using usb port so i using serial adpter to joint cable communication with my laptop.
    Is it cause that adapter so communication become interupt?or any other suggest

    Any kind of response will be highly appreciated

    Thank you
    Hi Faruq,

    you have to connect via rs232 only for carrier units..If you can not use rs232 connection you cant connect to the carrier reefer unit..

    See you

    reefer mechanic.

  29. #79
    GermanF's Avatar
    GermanF Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi guys,I've got a problem with Carrier 69NT40-511-38 controller M-2.The unit is set up-4C but does not stop gaining temperature when it is -4C inside.There is no any alarm.
    Please,give advice
    Thanks in advance.

  30. #80
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by GermanF View Post
    Hi guys,I've got a problem with Carrier 69NT40-511-38 controller M-2.The unit is set up-4C but does not stop gaining temperature when it is -4C inside.There is no any alarm.
    Please,give advice
    Thanks in advance.
    hi germanf

    when is unit stopping??its not stopping??

    see you

    reefer mechanic

  31. #81
    GermanF's Avatar
    GermanF Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi reefermechanic,

    I did not wait when the unit stops because of prodact. I am going to try and inform you.

    Regards German

  32. #82
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    sounds like the unit is overshooting setpoint. those units have a suction solenoid and a suction mod valve. sometimes the SSV sticks and sometimes the SMV sticks in the open spots. try and loosen the SSV its the valve on the right hand side if u are facing the unit. pull off the coil and you should hear a "CLICK" sound. if no click then u have either a stuck valve piston or no voltage to the coil. also check the fuses on the controller. if that checks out ok then its the SMV and u have to check the coil resistance 7.8 ohms. try this first and let us know

  33. #83
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    HI ALL
    I HAVE PROBLEME WITH A TIP in termoking -529
    (qeust not allowed ) i want to desacteved but i d'ont now wher or what id the solution for this tip
    best regard
    troytroy@live.FR

  34. #84
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    HAY ALL
    A HAVE PROBLEME WITH (qeust not allowed ) in thermoking i want to desacteved at disply but i d'ont now the solution for desacteved ;
    plz help

  35. #85
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by terminal View Post
    HAY ALL
    A HAVE PROBLEME WITH (qeust not allowed ) in thermoking i want to desacteved at disply but i d'ont now the solution for desacteved ;
    plz help
    Hi terminal,

    I think you want to clear alarm on TK unit, isn't it???You chek below mationed...

    Viewing the Alarm List Menu
    With the
    UNIT ON/OFF switch ON and the LCD
    display showing the standard display (setpoint):
    1. Press
    F2 key to directly enter the Alarms
    menu. The first alarm code number, alarm
    state and alarm description appears in LCD
    display.

    NOTE: Alarm codes are displayed in
    sequential order, not in the order of
    occurrence.
    2. Write down the first alarm code. Then press
    F2
    key to view the next alarm code when
    more than one alarm code has been recorded.
    3. Repeat step 4 until all alarm codes have been
    recorded. To scroll backward to return to a
    previous alarm code, press
    F3 key.
    4. To clear all alarm codes from the current
    display list and turn off the Alarm LED, all
    problems must be corrected and the alarm
    code
    acknowledgedin the Alarm List menu.

    NOTE: To acknowledge an alarm, press F4
    while the alarm code appears on the screen.
    The alarm state will change from Active or
    Not Active to Acknowledge.
    NOTE: If no key is pressed for 30 seconds,
    the controller returns to the previous menu
    Alarms Menu level or the LCD Standard Display.

  36. #86
    Join Date
    Mar 2009
    Location
    tanger
    Posts
    30
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi reefermechanic,
    I HAVE PROBLEME WITH A NEW CARRIER PRIMLINE .
    IF YOU CAN SEND ME MANUEL FOR THIS ONE .
    BEST REGARD
    TROYTROY@LIVE.FR

  37. #87
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    ..............................
    Last edited by reefermechanic; 27-02-2013 at 09:54 AM.

  38. #88
    GermanF's Avatar
    GermanF Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Hi all

    To Bruisermac

    Your suggestion might be true because the unit bekame run properly.
    Thanks for ansvering.

  39. #89
    Join Date
    Sep 2009
    Location
    tangier
    Age
    40
    Posts
    5
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    Hi All,

    I m senior reefer technician.İf you have got any problem about reefer container units . i will be here....

    All the best.

    he me can you show me wher can i found the Data connector of all reefer container ...because i want to by some of them

  40. #90
    saleemsalem's Avatar
    saleemsalem Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hi all,
    I got a problem in Carrier Reefer model 69NT40-511-357. The problem is F1 & F2 (both 5 Amps) keep blowing. I checked the main power and the Control Transformer output, all are normal. Changed the Controller, but still the same. Any idea about the problem's solution?

  41. #91
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by saleemsalem View Post
    Any idea about the problem's solution?
    F1 and F2 are ONLY for the controller.

    Replace controller with a known good one.

  42. #92
    saleemsalem's Avatar
    saleemsalem Guest

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by Will View Post
    F1 and F2 are ONLY for the controller.

    Replace controller with a known good one.
    Already replaced 2 new controllers MICROLINK2i, but all of their fuses F1 AND F2 keep blowing out.

  43. #93
    Join Date
    Sep 2008
    Location
    Portsmouth,England
    Age
    59
    Posts
    46
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    Hi OttiliPY.

    I donn t see like this model since a few years..Its very old but i think its working still

    First you have to check to the "board,timing and current control".Usually somethings may burning on this card.I hope you will find problem..

    Good luck

    Reefer Mechanic.

    Quote Originally Posted by OttiliPY View Post
    Hallo to all...
    I'm new at this comunity and i'm so happy to have found you. I have a problem with a refeer container. Its an older one (1989) build by Graaff Germany, and it has Carrier Transicold machinery.
    The problem is: it starts cooling fin until it reaches -3ºC. At that temp. it just turns off completely. Even the display turns off. It will eventually turn back on by it self after 15 min... How can i fix that..?
    Do you have the instructions manual for that one?
    Please help...
    model nº.: 69NT40-394-9
    Regards
    Alex
    Good day, on these older models if one of the 3 fan motors overheats and operates the internal klixon it cuts the control ciruit until the motor cools.
    Regards

  44. #94
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by saleemsalem View Post
    Already replaced 2 new controllers MICROLINK2i, but all of their fuses F1 AND F2 keep blowing out.
    Then you have something really messed up in the wiring somewhere.

    Something like this; few years back had a 'weird' problem on a TK. Evap fan motor smoked so bad it was feeding high volt back to mother board via motor overload circuit.
    You don't know fun till ya find 460V in your control circuit.


    Will

  45. #95
    Join Date
    Aug 2009
    Location
    Canada
    Age
    41
    Posts
    10
    Rep Power
    0

    Exclamation Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    I am having a problem with a TK CF-2 M39 container unit that was built for Crowley. Software Rev 0, 08/95 It operates on R404a not 134a, so because of the higher pressure there is no liquid line solenoid for pumping down when the unit is in heat.

    During the defrost cycle the compressor, evap fans, and the condenser fan should stop, and the heater coils come on. The problem is that the compressor is not turning off but the condenser and evap fans do, as they should. So the unit goes out on a code 10 and 40

    (40, Pump down terminated on time limit, does not apply to this unit, but its still coming up.)

    The relays, wiring, and contactors are all good. The unit works good except for on the defrost event.

    When put into a manual defrost with the condenser fan running, the compressor and fan continue to run, then shut off together and the defrost is completed successfully.

    When put into a manual defrost when the condenser fan is in an off cycle, the fan stays off, but the compressor stays on, that is when the unit goes out on high head.

    ???????????????????????????????????????????????????????

  46. #96
    Join Date
    Oct 2008
    Location
    bursa / turkey
    Age
    47
    Posts
    219
    Rep Power
    0

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by saleemsalem View Post
    Already replaced 2 new controllers MICROLINK2i, but all of their fuses F1 AND F2 keep blowing out.

    Hi saleemsalem

    did you check TR(transformer)? You try replace the transformer with new one. Good luck.

    reefer mechanic.

  47. #97
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    check the heater kliksons or the smv module. the easiest way is to disconnect the loads then slowly plug them in until u blow a fuse.

  48. #98
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    also i have seen the cool light in the display do funky stuff when it shorts

  49. #99
    Join Date
    Jul 2007
    Location
    Vancouver, Canada
    Age
    49
    Posts
    97
    Rep Power
    17

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    hey M L CA ... sounds like you need to wire your condenser fan to run all the time. that should be fine with R404a as you needed the cycling action with R134a to keep the head pressure up in cold ambients.

    the reason its tripping is cause it wants to pump down on defrost but because the fan is off it builds head and trips fast even before it can shut off. you may have a problem with the cycle switch as it should cut in on a rise in pressure. i have seen before that the compressor contactors stick and work erratically at best. we always lube those contactors.

  50. #100
    Join Date
    Dec 2005
    Location
    Upper left hand corner of the USA
    Age
    64
    Posts
    203
    Rep Power
    19

    Re: all reefer container problems/daikin/carrier/thermoking/mitsubishi

    Quote Originally Posted by reefermechanic View Post
    You try replace the transformer with new one.
    I'm curious as to why/how you came to this conclusion ?

Similar Threads

  1. Container Reefer Unit for Controlled Atmosphere (CA)
    By reeferman in forum New Technologies
    Replies: 9
    Last Post: 26-08-2011, 09:26 AM
  2. Replies: 12
    Last Post: 27-03-2011, 04:12 AM
  3. Help cutting open 40ft reefer, we now have problems
    By adrian_uk17 in forum Industrial
    Replies: 50
    Last Post: 28-11-2010, 09:11 AM
  4. Reefer container
    By stevec in forum Commercial
    Replies: 2
    Last Post: 25-01-2009, 06:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •