mitsi city multi

[transit 1]

Hi guys just a few questions about energy monitoring on city multi. at the moment i have 5 pury ep 250 all linked via tb7 with g50 and pac sc51. then linked in to 2x pac yg60,then.5 two cores 1 to each unit from the 2x pac yg 60 . Then i am not sure do i just get clamps for out door mains. or you guys tell me the way and where to get clamps and any thing else cheers

[Thermatech]

In the Uk Mitsubishi Electric controls department tend to mop up projects like this.
You might need TG2000 software with PC ethernet interface with the G50 and also current meters connected to PAC-YG60

Suggest get specialist advice from Mitsubishi Electric air conditioning controls department.
They can give you all the info & specifications. They can attend site to final commission with you.

[transit 1]

In the Uk Mitsubishi Electric controls department tend to mop up projects like this.
You might need TG2000 software with PC ethernet interface with the G50 and also current meters connected to PAC-YG60

Suggest get specialist advice from Mitsubishi Electric air conditioning controls department.
They can give you all the info & specifications. They can attend site to final commission with you.

cheers mate for that mitsi are coming out soon with tg 2000 thanks alot