Results 1 to 3 of 3
Thread: new product component question
-
25-09-2008, 05:29 PM #1
new product component question
I am designing a product, one component of which is a refrigeration element. I know nothing about refrigeration, but a lot about the product it will be part of. The goal is to force cooled air a distance of roughly twelve inches within a two-inch diameter tube. The air temperature at the tip of the tube should be four degrees C. The housing for the compressor and other elements is the size of a vaccuum cleaner. Any thoughts are appreciated.
-
25-09-2008, 05:36 PM #2
Re: new product component question
Find yourself a qualified and experienced A/C or fridge engineer to help you get the design right.
Good luck,
(There are just to many variables for us to be able to help you over the net, sorry)
-
25-09-2008, 06:00 PM #3
Re: new product component question
many thanks
Similar Threads
-
Leak Testing?
By Thana in forum Trouble ShootingReplies: 36Last Post: 31-08-2010, 02:57 PM -
Product Load Calculation
By boy in forum CommercialReplies: 4Last Post: 12-08-2008, 02:50 PM -
Component Analysis For R134a Domestic Refrgerator
By sbkvelocity in forum DomesticReplies: 22Last Post: 06-05-2008, 01:54 PM -
Refriferation cycle question
By ozmecheng in forum FundamentalsReplies: 32Last Post: 26-03-2008, 10:38 PM -
Urgent, Kirchoff question
By Peter_1 in forum FundamentalsReplies: 4Last Post: 20-01-2004, 03:12 PM