Results 1 to 2 of 2
-
07-09-2008, 08:37 PM #1
changing door seals on a CANDY CP2711F fridge freezer
I have a Candy CP2711F/9K fridge freezer and after finding the freezer food defrosted it looks like the seal on the freezer door is no longer sealing very well. The fridge seal doent look much better either.
I have found the seals on espares.com for about £21 each. But can anyone tell me how to fit these. There doesn't seem to be any screws on the inner door panel that grips the seal to the outer door panel (I hope that makes sense!)
Are they easy to fit?
Any help will be much appreciated.
Thanks
Gerry.
-
07-09-2008, 11:16 PM #2
Re: changing door seals on a CANDY CP2711F fridge freezer
I don't know that fridge myself but have changed similar fridge seals in the distant past.
They are often a pain because you have to force the seal into the gap between the door front and the inner plate.
If you peel open the existing one from the door you should see how it is fitted.
Some may have clips but normally just push fit over the seal frame.Brian - Newton Abbot, Devon, UK
Retired March 2015
Similar Threads
-
Hotpoint FF200E Fridge Freezer Fault
By fredalfred in forum DomesticReplies: 107Last Post: 29-12-2012, 01:26 PM -
BOSCH Fridge/Freezer - fridge wont cool....freezer fine
By andy_lanc in forum DomesticReplies: 6Last Post: 25-10-2010, 01:25 PM -
Hotpoint FFA71 Freezer High Temp Light / Fridge is Freezing
By sumnerpa in forum Trouble ShootingReplies: 1Last Post: 19-08-2008, 03:16 PM -
Candy fridge freezer not working properly
By Ju123 in forum DomesticReplies: 7Last Post: 13-08-2008, 10:31 AM -
crazy 3rd-world idea: aircon from small fridge
By lsemprini in forum FundamentalsReplies: 71Last Post: 29-05-2008, 01:10 AM