Results 1 to 2 of 2
Thread: Oil Identification
-
06-09-2008, 05:28 PM #1
Oil Identification
Being a Industrial Guy for the most part I need a bit of help from the Commercial Folks once in awhile.
I have a Falling Film Chiller that has been having problems as of late (Chester Jensen). I have discovered that the Hot Gas Bypass valve is the problem. Simple enough.
The Copeland Compressor (15HP R22) was changed a few years ago. I looked up the model and it was originally for another refrigerant, but usable with R22. It may well have come with POE oil. I suspect the Contractor drained the POE and replaced it with Alkybenzene or Mineral oil.
My question is how can I tell which is in the Compressor now?
-
06-09-2008, 06:35 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Oil Identification
Similar Threads
-
Piping identification system
By smpsmp45 in forum FundamentalsReplies: 1Last Post: 24-07-2007, 01:45 PM -
Compressor Parts Identification
By Mark in forum Supermarket RefrigerationReplies: 1Last Post: 11-05-2007, 07:23 PM -
Temperature probe identification
By ecclesk in forum Trouble ShootingReplies: 14Last Post: 01-09-2005, 07:41 PM -
Identification of a Prestcold
By vinic in forum FundamentalsReplies: 12Last Post: 06-01-2005, 02:23 AM -
Compressor parts identification
By Mark in forum Supermarket RefrigerationReplies: 0Last Post: 23-02-2004, 09:46 PM