Trane Chiller CVGD

[iceman007]

I went to have a quick look at this high pressure water cooled centrifugal chiller the other day, because about once a week it is showing a high motor temperature fault. I also noticed that it had been surging as well. Apparently the motor has been changed 2 or 3 times over recent years (burnt out)

My own thought was a refrigerant leak which might explain the high motor temp and surging, and I did notice that there was oil around the drain line from the bearing end of the compressor.

I haven't got a manual for the machine but felt a little bit cautious because of the history of the motor changes. I think a soft starter was fitted as well last time the motor was changed.

Thanks

[Grizzly]

Sorry Iceman.
I have been on the Trane website to obtain you a Manual.
But as this Chiller is not a new model it is not listed.
And they advise contacting a local dealer for older models!
Grizzly

[bruceboldy]

give me more of the model number and serial number and I will get the lit. I can get to the archives of our old lit
cvgd comes up with too many items without a bit more number....

Bruce

[iceman007]

give me more of the model number and serial number and I will get the lit. I can get to the archives of our old lit
cvgd comes up with too many items without a bit more number....

Bruce

CVGD 23 Have no serial number. I think it is around 1990 or so. R134a. Its a quite small machine, about 882kW ??

Thanks

[bruceboldy]

i have looked thru the lit files it is a r134 centrifigal but there is not a lot of data available. I will request from tech suppport some info for you .

bruce boldy

[wambat]

Not sure but try this
http://www.trane.com/webcache/rf/cen...a_05011992.pdf

[Peter_1]

CVGD 23 Have no serial number. I think it is around 1990 or so. R134a. Its a quite small machine, about 882kW ??

Thanks

Iceman, how's life going down under for the moment? Already settled little bit?

[daywalker]

i need wiring cvgd model. please help me

[iceman007]

i need wiring cvgd model. please help me

Send me a PM with your email address on there and I'll send you the diagram. I need the model number though.

Hello Peter, I never saw your message. Life is good here at the moment, well at least I can't complain and the work is OK. Plenty of it for good mechanics...

[FreezerGeezer]

Hey Iceman, you're clearly not in QLD then! lol. Work is veeerrrry thin on the ground here.

[iceman007]

Hey Iceman, you're clearly not in QLD then! lol. Work is veeerrrry thin on the ground here.

Yes I'm in QLD and we have plenty on at the moment. Saying that breakdowns are quieter, but thats when the annuals get done. We need more service techs to compensate for our workload.

[centrecipew]

Hey Fella,
Send us your email address. I will then forward a copy on to you.

[Peter_1]

Good to hear you enjoy it there. And the rest of the family, also settled a little bit?

[goshen]

hi i have the manules u want including wiring diagrames send me an e mail i will reply with an attachment
gill@gosheneng.co.il

[daywalker]

please send manual book and wiring cvgd for me in cindillaras@gmail.com

[Frosty734]

If the chiller is 1990 then it was originally on R12, Hope it was coverted by Trane to 134A
If not then there could be a few compatabilty issues
Any details you can supply would help
Ex Trane engineer

[centrifs]

Frosty, do you have the teardown manual for cvge compressor? I see the ex Trane Eng and am hoping to get the manual.

[Frosty734]

Hi yes i have a teardown manual, but it comes with the teardown engineer
There are one or two things it does not tell you which are critical
Not trying to be difficult
I'm sure you understand

[centrifs]

Frosty, I understand, thats your bread and butter. Thanks anyway

[serviceman]

If you can help I have the manual operation and maintenance of the CAVC with r12

[Blueboy]

FROSTY 734 please contact me I may have a little job for you and your manual !!!