Results 1 to 3 of 3

Thread: Design Pressure

  1. #1
    mdnorthrup's Avatar
    mdnorthrup Guest

    Design Pressure



    Hello All

    What is the design pressure on a data tag of a reach-in cooler referring to? Is it what that system is designed to run at, the max pressure it can safely run at, the max pressure the system can handle before the solder joints burst?



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Design Pressure

    The design pressure is probably the safe test pressure that can be applied to the system.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Feb 2008
    Location
    Las Vegas, NV
    Age
    67
    Posts
    331
    Rep Power
    17

    Re: Design Pressure

    mdnorthrup,

    Check out these two links. They contain good information on design pressures.


    Tecumseh: #ER-15
    http://www.hvacrinfo.com/tech_ae_index.htm


    Copeland: Section 25, # 25-1177
    http://www.hvacrinfo.com/ae_index.htm

Similar Threads

  1. How to Design Refrigeration Systems
    By US Iceman in forum Fundamentals
    Replies: 63
    Last Post: 24-07-2008, 04:27 PM
  2. Benji
    By benji in forum Trouble Shooting
    Replies: 29
    Last Post: 30-01-2008, 02:25 PM
  3. Building a wine cabinet
    By Rory in forum Technical Discussions
    Replies: 38
    Last Post: 13-07-2004, 08:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •