Results 1 to 7 of 7
-
29-08-2008, 07:47 PM #1
How To Design An Air Conditioner According To Required Btu
dear all,
i have calculated passenger bus BTU . i wanted to know what is the procedureof selection of parts like evaporator, condenser and compressor according to required BTU.
-
29-08-2008, 10:46 PM #2
Re: How To Design An Air Conditioner According To Required Btu
You ask the coil manufacturer to produce a coil to your specifications.
Or
You buy a dedicated bus AC systemBrian - Newton Abbot, Devon, UK
Retired March 2015
-
04-09-2008, 05:53 PM #3
Re: How To Design An Air Conditioner According To Required Btu
have you desided how you gone build it in, in the bus i mean. is it a bus for local people, a cind of taxi or a bus for voyaging?
is it to be nice and stylish , or simple and strong ?
are you going to work whit a compressor on the engine ore a stand alone compressor on 12V or 24 V ?
i have designd a tool for myself to make evaps from tubes of 1/4" . because there are no alu finns on the evaps i ad more tube lenght and try to make cross overs.
Ice
-
18-09-2008, 11:31 AM #4
Re: How To Design An Air Conditioner According To Required Btu
what is the difference between star delta starter and soft starter
-
18-09-2008, 05:18 PM #5
Re: How To Design An Air Conditioner According To Required Btu
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
21-09-2008, 06:46 AM #6
Re: How To Design An Air Conditioner According To Required Btu
how to calculate tube size for a 48000 btu water cooled condenser
-
04-10-2008, 11:02 PM #7
Re: How To Design An Air Conditioner According To Required Btu
Dear sir I can give you the key ideas of designing an air conditioning system.
1) calculate the needed capacity (Btu/hr)
2) specify the design tempretures (condensing and evaporating)
3) choose the compressor that gives you the needed capacity for the specified design tempreturs in 2
4)design the condenser using
5)design the evaporator
6)choose the expansion device
7)choose the accessories (filter. . .)
in designing the evaporator take in consideration that the face velocity should not exceed 400 fpm
and in designing the condenser take in consideration that the face velocity should not exceed 800 fpm
How to design the evaporator (manual calculation is very complicated), you can use a software such as USAcoil , the same applies to the condenser.
please note that the evaporator and condenser are heat exchangers affected by the circuiting of the refrigerant in them, feeds have to be specified as well as rows and headers.
Take good care of the refrigerant pressure drop in the coils and of the subcooling and superheating.
Please if you need more info don't hesitate to ask
Best respects and regardsEngineering, sciences, math, physics and my brain will generate "not responding " soon
Similar Threads
-
HELP REQUIRED FOR DESIGN OF ac cab
By khadar in forum Technical DiscussionsReplies: 7Last Post: 10-03-2008, 06:18 AM -
Efficient Water-Source Condenser Design?
By Enginerd in forum FundamentalsReplies: 4Last Post: 28-05-2007, 05:11 AM -
Replacement fo CO2 Bulk Tank refrigeration unit
By pabs_ref in forum CO2Replies: 31Last Post: 28-11-2006, 10:32 PM -
How to Design Refrigerated Cabinets
By Rayin in forum FundamentalsReplies: 5Last Post: 26-11-2006, 08:27 AM