Results 1 to 2 of 2
Thread: Danfoss Performer Scroll
-
28-08-2008, 08:12 PM #1
Danfoss Performer Scroll
Hi all.
I have a Danfoss Performer Scroll which is one of two in a two circuit chiller(four comps alltogether)its a SZ240A4MBA.It sounds like the internal check valve is sticking open sometimes, because if this comp isn't running but the other comp starts up it sounds like the scroll is being pushed backwards. Has anyone come across this before. This is the only explanation I can think of that would cause this noise.
Also does anyone know if Glenn Moore is still on 01474707537.Thanks in advance. Kev.
-
30-08-2008, 03:36 PM #2
Re: Danfoss Performer Scroll
Had the same thing once, but not on a Danfoss scroll. Installede a 2nd check valve just after discharge and was fine afterwards
Similar Threads
-
Copeland Scroll Advanced Protection Problems
By dwayne in forum Trouble ShootingReplies: 8Last Post: 24-09-2010, 06:54 AM -
Digital scroll
By archibaldtuttle in forum CommercialReplies: 3Last Post: 06-01-2010, 05:27 PM -
Problems Danfoss Safetyvalve
By Bart Nabbe in forum NH3Replies: 7Last Post: 26-06-2008, 09:05 PM -
Danfoss Compressors
By iceman007 in forum FundamentalsReplies: 0Last Post: 28-07-2006, 06:32 PM -
Danfoss parellel scroll compressors
By Lc_shi in forum Technical DiscussionsReplies: 2Last Post: 30-03-2006, 08:20 AM