Results 1 to 5 of 5
Thread: Cutting device for Tube ice
-
28-08-2008, 02:45 PM #1
Cutting device for Tube ice
Dear Buddies,
I need your help for design of a device or tools for cutting tube ice during its harvesting (by using hot gas).
Thank you very much for your help and kind attention.
-
29-08-2008, 09:52 AM #2
Re: Cutting device for Tube ice
Dear maguro4448,
Sorry , I don't know what your mean.
As usually, tube ice machine has it's cutting tube ice device.
-
29-08-2008, 10:50 AM #3
Re: Cutting device for Tube ice
Dear ntfreezer,
Yes you right each unit tube ice has it's cutting device. Do you have design or drawing of this cutting device, as I need to make drawing for my dissertation.
Thank you for your attention
Regards,
Maguro4448
-
29-08-2008, 10:44 PM #4
Re: Cutting device for Tube ice
most of the companies that manufacturer an ice maker have a propritary design for the cutter.
But it is really pretty simple ,
It is a rotating set of blades and a slinger all mounted on a rotating table.
this is usually shaft driven with a top and bottom bearing with a belt drive below to a outboard mounted electric drive
Most are preset for the ice cube lengh before shipment .
Bruce
-
30-08-2008, 06:38 AM #5
Re: Cutting device for Tube ice
Dear bruceboldy,
Thank you very much for your information for the device.
I will try to make the design.
Regards.
Similar Threads
-
Cutting Corners
By eggman08.2008 in forum Technical DiscussionsReplies: 15Last Post: 05-07-2008, 06:25 PM -
no metering device
By Richvacr in forum CommercialReplies: 5Last Post: 05-06-2008, 02:40 PM -
Cutting unistrut
By Andy AC in forum Tools and CalculatorsReplies: 9Last Post: 27-05-2007, 09:32 PM -
Protection device
By petre11 in forum ElectricalReplies: 11Last Post: 06-06-2006, 11:23 PM -
Energy Managment XDX Device
By Steve Wright in forum Supermarket RefrigerationReplies: 1Last Post: 08-09-2005, 06:19 PM