Results 1 to 6 of 6
-
25-08-2008, 09:15 PM #1
freeze! ok ok I drop my weapons...
Hi all, happy to find you guys.
here's my problem:
2 walls mounted lg installed in 2 differents rooms sharing the same "BIG" hole ( their backs are practically stick!), and while one of boths run (it's a bi-split), the evaporators of the other is frosting, the suction line's frosting, the compressor's frosting!... I've got a little idea but your point of view is always welcome.
-
25-08-2008, 10:37 PM #2
Re: freeze! ok ok I drop my weapons...
either the pipes or control cables are mixed up.
Al
am in cote dazur tomorrow for a week if you want help!!
-
26-08-2008, 04:43 PM #3
Re: freeze! ok ok I drop my weapons...
had this before, almost certainly mixed up wring or pipes!
-
26-08-2008, 11:06 PM #4
Re: freeze! ok ok I drop my weapons...
Thanks for the answer guys, I'll check it tomorrow.
Al, I'm sorry but I've to tell you La cote d'Azur sucks! Try le Bassin D'arcachon, I bet you'll enyoy it.
-
04-09-2008, 08:00 PM #5
Re: freeze! ok ok I drop my weapons...
yeah right, le bassin D'arcachon.
yore just jealous of Le calances.(hihi)
Ice
-
05-09-2008, 01:24 PM #6
Re: freeze! ok ok I drop my weapons...
Icecube means Calanques.
Similar Threads
-
A question about the pressure drop in coil .
By jackcn in forum FundamentalsReplies: 20Last Post: 13-12-2008, 05:10 PM -
pressure drop and chillers
By Dimitris in forum Technical DiscussionsReplies: 6Last Post: 30-05-2008, 08:33 PM -
pressure drop of pump return line ammonia
By Moeller in forum FundamentalsReplies: 5Last Post: 04-09-2007, 05:21 AM -
Optimal pressure drop in condensers and evaporators
By MrReds in forum RefrigerantsReplies: 8Last Post: 06-10-2006, 10:12 PM -
TEV capacity related to pressure drop
By DaBit in forum CPU OverclockersReplies: 8Last Post: 06-12-2002, 05:11 PM