Results 1 to 19 of 19
  1. #1
    Join Date
    May 2008
    Location
    Midlands UK
    Age
    41
    Posts
    5
    Rep Power
    0

    How much should I be paying?



    Hi all,

    New to the site - very informative.

    I'm looking to purchase a single room a/c system, I've had a site survey done and am looking at a Daikin system

    The indoor unit is a FTXS35DW and the outdoor unit is an RXS35.

    I'm getting quotes for around £1200 + VAT at 5%, is this about right? I am based in the Midlands if anyone has any recommendations please let me know!

    Thanks



  2. #2
    Join Date
    Feb 2007
    Location
    UK
    Posts
    2,473
    Rep Power
    45

    Re: How much should I be paying?

    Hard to say if the "price is right" when we don't know anything about the install.

    Have a look at my website for some advice of what to look for when buying A/C units.
    (No, I do not push anything, it's pure free info, call it public service)

  3. #3
    Join Date
    Apr 2006
    Location
    Not so sunny coast (BC Canada)
    Age
    41
    Posts
    1,620
    Rep Power
    23

    Re: How much should I be paying?

    What do you want? Crap or quality?

    You pay for what you get and the premium comes at a price!

    Better way to put it your asking us if you got a fair price?

  4. #4
    Join Date
    May 2008
    Location
    England
    Posts
    101
    Rep Power
    16

    Re: How much should I be paying?

    Get another couple of quotes.

  5. #5
    Join Date
    Aug 2001
    Location
    UK
    Posts
    1,046
    Rep Power
    24
    .

    The split AC market in the UK is currently flooded with systems made in the Far East and sold at very cheap prices. Some of these are also being sold by other companies on a ‘badged’ basis.
    This site has numerous posts on the alleged lack of quality in these areas that are posted over the years. Many of these units will lack the back-up support of an established manufacturer, so I’ll leave that decision to you.

    One further thing to ask is if the system in question qualifies for Enhanced Capital Allowances (ECAs). This means that if you are a business paying corporation tax and in profit in the year of purchase, you can claim the equivalent of the depreciation on the equipment that would be allowed over 10 years back in the in the first year.
    This is not free money, but as a rule of thumb, this could work out at about 30% of the purchase cost and you accountant should be able to tell you about it.

    You won’t qualify for the tax break if you are a private individual or a not-for profit organisation, but you can use the Government’s ECA listing as a benchmark of energy efficiency of the unit that you select.

    They are listed by technology type, manufacturer, then model number.

    You can read about it here http://www.eca.gov.uk/etl/default.htm

    .

  6. #6
    Join Date
    Apr 2006
    Location
    stafford
    Age
    42
    Posts
    974
    Rep Power
    19

    Re: How much should I be paying?

    Quote Originally Posted by lm2008 View Post
    Hi all,

    New to the site - very informative.

    I'm looking to purchase a single room a/c system, I've had a site survey done and am looking at a Daikin system

    The indoor unit is a FTXS35DW and the outdoor unit is an RXS35.

    I'm getting quotes for around £1200 + VAT at 5%, is this about right? I am based in the Midlands if anyone has any recommendations please let me know!

    Thanks
    my ten pence worth,where is the ac system going? price is depended on so many factors,like already said the make of system but then there is the labour involved with a nature of the install,is it back to back? will pipes/cables need running in lofts ect how long is the run ect will any holes needed cutting into brick work? will a sub contractor be needed to do this?
    Paul


    "KEEP IT COOL"

  7. #7
    Join Date
    May 2008
    Location
    Midlands UK
    Age
    41
    Posts
    5
    Rep Power
    0

    Re: How much should I be paying?

    Thanks all for the replies.

    The power cables can be run directly from the fuse box up into the loft and then down into the master bedroom.

    The indoor unit would go onto the bedroom wall and the outdoor unit will be on the other side of that wall; ie it is an outside wall and minimal piping would be required.

    I definitly want quality, not crap!

    I must say however I have found local companies to be quite unreliable, twice i rang one company in Birmingham leaving my details expecting a call back for a quote and they never rang me... unbelievable!

  8. #8
    Join Date
    Dec 2005
    Location
    Cheshire
    Age
    39
    Posts
    264
    Rep Power
    21

    Re: How much should I be paying?

    If your price includes all mains electrical work, then yes that is a really good price.
    Note your mains supply from the consumer will run to the outdoor unit, the indoor unit will then take its supply from here via the interconecting cable. You will require a 10amp mcb for that system.
    I did similar install with an FTXS25D not long ago for £1,100 plus VAT@5%.
    Hope this helps

  9. #9
    Join Date
    Jul 2008
    Location
    London
    Posts
    848
    Rep Power
    17

    Re: How much should I be paying?

    Wiring from a consumer unit evokes Part P regulations and must by law have a ticket issued or the local council must inspect.
    Best bet would be either a plugtop or a 13a fused spur. (but not from a Kitchen)

    Power to outdoor is notifiable either way...

    Multisync
    London

  10. #10
    Join Date
    Feb 2007
    Location
    UK
    Posts
    2,473
    Rep Power
    45

    Re: How much should I be paying?

    Quote Originally Posted by multisync View Post
    Wiring from a consumer unit evokes Part P regulations and must by law have a ticket issued or the local council must inspect.
    Best bet would be either a plugtop or a 13a fused spur. (but not from a Kitchen)

    Power to outdoor is notifiable either way...

    Multisync
    London

    ?????



    So, first the LAW states that you must follow part P and get the right paperwork from the installer, OK I'm with you this far but then the LAW would allow you to feed a fixed installation from a plug/socket?? No, you got me there I'm afraid, can't see it...

  11. #11
    Join Date
    Apr 2006
    Location
    Not so sunny coast (BC Canada)
    Age
    41
    Posts
    1,620
    Rep Power
    23

    Re: How much should I be paying?

    Quote Originally Posted by The Viking View Post
    ?????



    So, first the LAW states that you must follow part P and get the right paperwork from the installer, OK I'm with you this far but then the LAW would allow you to feed a fixed installation from a plug/socket?? No, you got me there I'm afraid, can't see it...
    think thats good? Here it is illegal to vent R-134a with lose of liscance and a 25,000 dollar fine, yet they sell it in cans as an air duster for electronics!

    Air duster = R-134a
    .................R-152a
    Last edited by The MG Pony; 28-08-2008 at 06:40 PM.

  12. #12
    Join Date
    May 2008
    Location
    Midlands UK
    Age
    41
    Posts
    5
    Rep Power
    0

    Re: How much should I be paying?

    It's in... thanks for the replies all. What a stunning piece of kit. The system is so quiet you can barely hear it on night mode.

    Indoor unit is also a lot smaller than I expected.

    Glad I went Daikin.

  13. #13
    Join Date
    Jul 2008
    Location
    London
    Posts
    848
    Rep Power
    17

    Re: How much should I be paying?

    Quote Originally Posted by The Viking View Post
    ?????



    So, first the LAW states that you must follow part P and get the right paperwork from the installer, OK I'm with you this far but then the LAW would allow you to feed a fixed installation from a plug/socket?? No, you got me there I'm afraid, can't see it...
    General notes and guidance

    H, The installation of fixed equipment is within the scope of Part P even when the final connection is by a 13a plugtop and socket.However work is notifiable only if involves fixed wiring and and the installation of a new circuit or the extension of a circuit in a kitchen or special location or associated with a special installation.
    Every 17th qualified electrician I have spoken too agrees that there would be no ramifications if wired to a 13a fuse spur or 13a plugtop provided the necessary Regs are adhered too

    Multisync
    london

  14. #14
    Join Date
    Aug 2004
    Location
    England
    Age
    51
    Posts
    744
    Rep Power
    25

    Re: How much should I be paying?

    My interpritation of Part P for conseratories tells me. If i run a new circuit to power an A/C system it is notifiable.
    If you extend or modify an existing circuit, ie add a switched fused spur your ok.

    What i tend to do if the customer is squealing on the price, is get a disclaimer signed stating that the 13a plugtop i use is for commissioning purposes only.
    Whether they get or sparky in or just replace the 13a plug when i'm gone is none of my business.
    As long as i'm happy i'm not leaving behind a fire hazard, it's up to them.

    eggs

  15. #15
    Join Date
    Aug 2001
    Location
    UK
    Posts
    1,046
    Rep Power
    24

    Re: How much should I be paying?

    .


    Whilst some of you are mentioning the UK law and Part P of the UK Building Regulations, what the UK law also states is that if the appliance is supplied with a power cord (i.e. from the indoor unit) AND is capable of being powered from a UK type 13 A domestic socket,(i.e. an inverter split system), then the supplier MUST BY LAW supply it for sale an approved plug.

    There are exclusions in le the law that allow appliances with a fixed power lead to be supplied from a fixed circuit (i.e. a spur or switched spur or a similar switched supply and NOT a 13 amp plug).

    Many such Japanese split- type systems fall into this category and to overcome any ambiguities, many of the manufacturers state that it must be powered from a fixed supply and carry a note top this effect in the fitting instructions..

    The law? It is SI No. 1768 / 1994 - CONSUMER PROTECTION
    - The Plugs and Sockets etc. (Safety) Regulations 1994

    Here it is: http://www.opsi.gov.uk/si/si1994/Uksi_19941768_en_1.htm

    In any split system, the interconnecting wiring must be carried out by a competent person within the description in the regulations, so you’re back into the realm of Part P.




    .

  16. #16
    Join Date
    May 2008
    Location
    Midlands UK
    Age
    41
    Posts
    5
    Rep Power
    0

    Re: How much should I be paying?

    After reading the instructions for the installed unit, I have noticed that in heating mode it is recommended to be used only when the outdoor temperature is above 15 degrees celcius.

    Is this standard for heat pumps, I know they pump heat from outside but was hoping to use the unit on heat mode in the winter, but I certainly don't want to damage it!

  17. #17
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,151
    Blog Entries
    6
    Rep Power
    36

    Re: How much should I be paying?

    Quote Originally Posted by lm2008 View Post
    After reading the instructions for the installed unit, I have noticed that in heating mode it is recommended to be used only when the outdoor temperature is above 15 degrees celcius.
    You mean below 15°C?

  18. #18
    Join Date
    May 2008
    Location
    Midlands UK
    Age
    41
    Posts
    5
    Rep Power
    0

    Re: How much should I be paying?

    Quote Originally Posted by nike123 View Post
    You mean below 15°C?
    Sorry, checked again its -15c to +15c.

    So the unit can transfer heat from outside to in, even when its well below freezing outside, wow..

  19. #19
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,151
    Blog Entries
    6
    Rep Power
    36

    Re: How much should I be paying?

    Quote Originally Posted by lm2008 View Post
    Sorry, checked again its -15c to +15c.

    So the unit can transfer heat from outside to in, even when its well below freezing outside, wow..
    Yes, but probably with 1/2 of maximum capacity when outdoor is -15°C!
    Something like this:
    Last edited by nike123; 11-10-2008 at 11:06 AM.

Similar Threads

  1. I've had it with the end users!
    By The Viking in forum Air Conditioning
    Replies: 11
    Last Post: 08-01-2008, 05:05 PM
  2. paying attention
    By REEFER-TEK in forum Chit Chat & Service Stories
    Replies: 3
    Last Post: 04-12-2007, 12:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •