RCgroup UNICO.A.STD

[wingman]

Hey guys,


This will be my first post .

I have a problem with a UNICO.A.STD group from RCgroup. It keeps giving me a Error code 48.

I've been searching on the internet for manuals or fault discriptions but I haven't found any so far.

Kinda hope you people have a manual or something that might help me resolving the problem.



Thanks in advance.

[ptsac]

alarm code 48 is probe failure. This could be low or high pressure or oil pressure. The message should say whether it is L1 H1 or O1 for compressor 1, H2 etc for compressor 2. All these transducers are located on relevant compressor.

[nike123]

Hey guys,


This will be my first post .

I have a problem with a UNICO.A.STD group from RCgroup. It keeps giving me a Error code 48.

I've been searching on the internet for manuals or fault discriptions but I haven't found any so far.

Kinda hope you people have a manual or something that might help me resolving the problem.



Thanks in advance.

http://www.google.com/url?sa=t&ct=re...Bqu1rtXEVNFvpw

[wingman]

Thanks ! I haven't been on site yet, some technician on site called me for this. All he said was error 48. I'll check tomorrow what probe exactly has failed.

Thanks for the Russian schematics