Results 1 to 4 of 4
Thread: CO2 bulk tank evaporator
-
15-08-2008, 02:28 PM #1
CO2 bulk tank evaporator
I'm in the process of designing a CO2 bulk tank and I'm having trouble obtaining an evaporator coil. I'm close to choosing the condensing unit I want to use.
Is there a company out there that will design a coil for me based on the condensing unit and space constraints I have?
Thanks in advance!
-
15-08-2008, 05:09 PM #2
Re: CO2 bulk tank evaporator
You might try these guys...
http://www.srcoils.com/If all else fails, ask for help.
-
16-02-2010, 05:11 PM #3
-
16-02-2010, 07:46 PM #4
Re: CO2 bulk tank evaporator
You can achieve as good a result using a thermosyphon system, a brazed plate heat exchanger, on the top of the tank. I have used many SWEP PHE for CO2 liquification.
Make sure vapour line enteres the vessel and not just welded to the shell. (non condesables)
Similar Threads
-
Superheat and Subcooling
By Chunk in forum FundamentalsReplies: 42Last Post: 15-01-2011, 01:24 AM -
CO2 Bulk tank
By guapo in forum CO2Replies: 7Last Post: 10-03-2009, 12:46 PM -
Evaporator TD for Bulk milk coolers
By tadipatrir in forum CommercialReplies: 8Last Post: 01-09-2007, 05:16 PM -
bulk tank
By milton in forum Trouble ShootingReplies: 0Last Post: 04-02-2007, 12:11 PM -
evaporator tank milk
By milton in forum Trouble ShootingReplies: 2Last Post: 22-06-2006, 09:18 PM