Results 1 to 6 of 6
Thread: Compressor Micro Simulator
-
14-08-2008, 11:50 AM #1
Compressor Micro Simulator
Hello everyone,
I have a local college asking me to build a simulator out of a Quantum LX. Has anyone done this before? I have some ideas but would appreciate some feedback. I was thinking about using rotary potentiometers in place of all pressure and temperature transducers so they can change conditions easily, cause failures and play with calibrations. What do you think?
-
14-08-2008, 11:59 AM #2
Re: Compressor Micro Simulator
Hi, keepitcool
Good thought.
-
15-08-2008, 08:34 AM #3
Re: Compressor Micro Simulator
What is a Quantum LX?
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
15-08-2008, 08:42 AM #4
Re: Compressor Micro Simulator
Hi,
http://www.frickcold.com/Products.as...lay=30&View=ON
.... just need some time to read all ...
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
15-08-2008, 10:59 AM #5
Re: Compressor Micro Simulator
If you are interested this may also help.
http://frickcontrols.com/
It is just a micro though. Any thoughts about a simulator?
-
15-08-2008, 09:59 PM #6
Re: Compressor Micro Simulator
I went to an FES training class and their simulators used rotary potentiometers to change the temperature and pressure values! Sounds like fun project! Good luck!
Similar Threads
-
Reefer Functionality simulator
By badsykes in forum Technical SpeculationsReplies: 9Last Post: 16-04-2007, 11:42 PM