Results 1 to 2 of 2
-
14-08-2008, 04:57 AM #1
Pressure control settings for R12 vs r414b hotshot
Evening, I searched, no luck, When retro fitting with 414b ICOR hotshot replacement ***** for R12 , do I use same pressure settigns as I would for R12 or is there a different T/P chart for ICors hotshort to set air defrost on walkin coolers and pump down controls
-
14-08-2008, 02:07 PM #2
Re: Pressure control settings for R12 vs r414b hotshot
MGL
Here's the link to Icor's Hot Shot technical information.
http://www.icorinternational.com/hotshot.htmlLast edited by Brian_UK; 14-08-2008 at 11:37 PM. Reason: Link edited to direct to Hotshot page.
Similar Threads
-
pressure control settings
By jcool808 in forum FundamentalsReplies: 10Last Post: 07-05-2009, 10:32 AM -
Benji
By benji in forum Trouble ShootingReplies: 29Last Post: 30-01-2008, 01:25 PM -
Short Cycling blues & low pressure control switch
By mccoolair@yahoo in forum Supermarket RefrigerationReplies: 14Last Post: 09-04-2006, 09:28 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM