Results 1 to 2 of 2
Thread: Repair a shorted scroll?
-
15-08-2008, 01:45 PM #1
Repair a shorted scroll?
Hi Guys,
I have two 5hp Copeland Scrolls that both trip electrical breakers when turned on. An engineer mentioned to me that he had heard they could be fixed but wasn't sure how. Something about flushing them out?
Anyone done this successfully before?
-
15-08-2008, 09:55 PM #2
Re: Repair a shorted scroll?
If they're shorted, replace them.
There ain't no magic.
The flush he's referring too would be used after the compressor changeout to clean the system.Last edited by powell; 15-08-2008 at 09:57 PM.
Similar Threads
-
Copeland Scroll Advanced Protection Problems
By dwayne in forum Trouble ShootingReplies: 8Last Post: 24-09-2010, 06:54 AM -
Digital scroll
By archibaldtuttle in forum CommercialReplies: 3Last Post: 06-01-2010, 05:27 PM -
copeland ZR scroll vs VR scroll
By Lc_shi in forum Technical SpeculationsReplies: 7Last Post: 03-09-2008, 04:27 PM -
Hermetic reciprocating versus hermetic scroll
By Cofreth in forum Technical DiscussionsReplies: 26Last Post: 19-11-2005, 06:29 PM