Results 1 to 3 of 3
Thread: R507 to R404a
-
09-08-2008, 03:50 PM #1
Veteran Poster
- Join Date
- May 2006
- Location
- Isle of Wight, Uk
- Age
- 47
- Posts
- 424
- Rep Power
- 20
R507 to R404a
Hello guys, I have been asked to quote for the replacement of a compressor on a caravell(framec) upright display freezer. It has an aspera R404a compressor but is charged with R507 as standard.Can I use r404a without any problems or would I have to change/alter capiliary. I don't carry R507 but have plenty of R404a so it would be a shame to have to get a new bottle just for a puff of gas (300g)
Andy
-
09-08-2008, 04:53 PM #2
Moderator
Site Moderator : and general nice guy
- Join Date
- Sep 2003
- Location
- ISRAEL
- Age
- 72
- Posts
- 4,248
- Rep Power
- 46
Re: R507 to R404a
Yes you can, no problems.
Do not forget to write it on the unit.
-
09-08-2008, 05:36 PM #3
Veteran Poster
- Join Date
- May 2006
- Location
- Isle of Wight, Uk
- Age
- 47
- Posts
- 424
- Rep Power
- 20
Re: R507 to R404a
Cheers Chemi
Andy
Similar Threads
-
R507 instead R404a?
By Friobernal in forum RefrigerantsReplies: 49Last Post: 09-04-2011, 12:42 AM -
R507 in an R134a compressor: any danger?
By DaBit in forum Technical SpeculationsReplies: 30Last Post: 21-12-2009, 12:44 AM -
Why not R404a?
By afak in forum Technical SpeculationsReplies: 12Last Post: 02-04-2007, 08:58 PM -
R507 in an R134a compressor: system design
By DaBit in forum Technical SpeculationsReplies: 17Last Post: 01-05-2003, 09:25 AM -
Effect on design evaporator by using R507 instead of R22
By lappee in forum RefrigerantsReplies: 2Last Post: 18-09-2001, 05:15 PM
