Results 1 to 2 of 2
Thread: phenolic foam panels
-
03-08-2008, 08:40 AM #1
phenolic foam panels
Has anyone used Phenolic foam panels for Cold stores. One of Navt Tenders is specifying that the panels should be in Phenolic foam . Those are meant for fire proof category. But I think making panels out of this foam could be difficult as I have seen that the cell structure is rather different than PUF foam.
-
04-08-2008, 12:03 AM #2
Re: phenolic foam panels
Phenelic foam is ok ...what ever you do don't go to polystyrene panels ... they're extremely dangerous in a fire situation. They were very common in the UK for many years but in a fire situation they're extremely dangerous ...very frightening to see the speed at which they propogate a fire within a building.
choose well and be safeReality is an elusion created by alcohol deficiency. Quaff and enjoy. [Yorkshire, UK]
Similar Threads
-
Support for the wall panels - cold store with no locks
By smpsmp45 in forum NH3Replies: 1Last Post: 10-07-2008, 09:06 AM -
Cold room panels
By LLCooLJ in forum CommercialReplies: 6Last Post: 07-04-2008, 04:18 PM -
PUF Panels
By rajgulati in forum IndustrialReplies: 4Last Post: 28-03-2008, 02:50 PM -
PUF panels Vs PIR panels
By smpsmp45 in forum NH3Replies: 0Last Post: 03-09-2007, 01:34 PM