Results 1 to 4 of 4
Thread: Zanotti Temp. Controller
Threaded View
-
10-09-2009, 01:34 PM #1
Zanotti Temp. Controller
Could someone please help with a problem I have with a Zanotti unit, I got to the machine, and it was my first time working on one. It had ERROR 9 showing, I cleaned out the condensor and switched off and on at the mains. It fired up and now its not going into defrost and the evap fan is not running (A massive block of ice) from something that was working fine a couple of days back. Also any literature on how the controller functions and how to access the parameters etc. Its for a 2,4m x 2,4m x 2,4m freezer room that runs on R404. many thanks
Similar Threads
-
19XL High Discharge Temp intermittent alarm at compressor start
By pete_d in forum CommercialReplies: 5Last Post: 08-11-2009, 05:10 PM -
temp controller prob
By INKYMART123 in forum New to REReplies: 3Last Post: 09-04-2009, 02:32 PM -
Daikin VRV-S controller configuration
By mchild in forum Air ConditioningReplies: 1Last Post: 12-03-2009, 08:06 PM -
Daikin Controller
By mchild in forum Air ConditioningReplies: 11Last Post: 24-11-2008, 02:34 AM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM