Results 1 to 3 of 3
Thread: Communication
-
30-07-2008, 01:11 PM #1
Communication
We have YORk Centrifugal Chiller (model no. YTJ3C3E25CNJ) with VSD Control (Model no.
TM 658T B12F-50D ).
Now we want data logging for many parameter. Can ne one please suggest how I can proceed.
Thanks in Advance.
-
30-07-2008, 06:17 PM #2
Re: Communication
Have a look at www. resourcedm. com. see if they have the kit you want, but not sure about shipping to India though or aftersales service. you should contact them direct to ask.
Just re-read your post and this would require more modifications than you probably want to do. Have you tried www. york. com or www. johnsoncontrols. com to see if they have anything suitable for you machine.Last edited by andywill; 30-07-2008 at 06:39 PM. Reason: re-read and this may not be compatible with his controls
-
15-04-2011, 05:39 PM #3
Re: Communication
The best is contact the jci office in your country and ask them about the possibilities, just a friendly suggestion don't try to experiment with this kinda of chillers they cost a lot and they do have a lot of parameters
Similar Threads
-
Communication issue
By Husky250 in forum Air ConditioningReplies: 2Last Post: 08-06-2008, 05:30 AM -
temporary communication failure in supermarket rack controller
By racktech2008 in forum Supermarket RefrigerationReplies: 12Last Post: 27-04-2008, 09:17 AM -
Communication Protocol
By Peter_1 in forum Air ConditioningReplies: 1Last Post: 22-01-2004, 03:47 PM