Results 1 to 2 of 2
  1. 23-07-2008, 09:42 PM #1
    adrianshanov's Avatar
    adrianshanov Guest

    Question R134a System Design



    Hello everyone,

    I was asked to educated myself on R134a refrigeration system design. I know the theory behind the whole system but what I lack is how to start from a given volume of space (i.e. 25 cu.ft) and then start selecting my evaporator (coil size, width X height X depth, tube I.D. , wall thickness, Fin thickness spacing, etc.) and then condenser, and compressor and cap tube length, thickness (pressure drops?)

    I am sorry if this is a repeat thread, I had to start from somewhere.

    Thank you all, and looking forward to learning more...
    adrian


  2. 23-07-2008, 10:51 PM #2
    GXMPLX's Avatar
    GXMPLX
    GXMPLX is offline Veteran Poster I am starting to push the Mods: of RE
    Join Date
    May 2008
    Location
    weston
    Posts
    348
    Rep Power
    16

    Re: R134a System Design

    Very symple, read this post.
    http://www.refrigeration-engineer.co...ad.php?t=14013
« Previous Thread | Next Thread »

Similar Threads

  1. Daikin fault codes
    By Chris2005 in forum Air Conditioning
    Replies: 45
    Last Post: 21-03-2012, 10:09 PM
  2. Single stage refrigeration system optimizing diagram
    By autt in forum System Optimization
    Replies: 34
    Last Post: 03-12-2008, 03:13 PM
  3. Fan model for system optimization
    By autt in forum System Optimization
    Replies: 8
    Last Post: 31-03-2007, 05:34 AM
  4. What is System balance?
    By shogun7 in forum Technical Speculations
    Replies: 56
    Last Post: 19-01-2006, 09:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules