Well guys still having all the same problems as before, I have removed the filter drier as well now but this R14 refrigerant seems to be blocking the cap tube, the temperature starts to come down to around -130c then it slowly starts to rise again back up into the + fingers, there is very little cooling on the suction line and is ain a deep vacuum all the time with high pressures from the liquid line.
I have tried all that has been stated but still am having these problems, is there any way I can get over this problem or is this typical of the R14 refrigerant, would changing the cap tube I have from .036 to .042 help at all as the cap tube I have and the refrigerant used seems to just be blocking in the cap tube.

Any help would be gratefully welcomed.