Results 1 to 6 of 6
-
16-07-2008, 07:06 AM #1
How best to measure compressor run time?
This may well have been covered before, especially with me being a new user, so feel free to point the direction of an old thread.
What I'd like to know is your product recommendation for the best/simplest way to measure compressor run time hours for a commercial walk-in freezer over 2 weeks?
At this stage I'm considering a HOBO state logger connected to a clamp-on current switch or maybe one of those small magnetic field motor on/off recorders.
Any advice from those that have been there before?
-
16-07-2008, 10:13 AM #2
Re: How best to measure compressor run time?
Am I missing something here?
Surely the easiest/cheapest way is just to fit a simple hours run meter to the contactor.
-
16-07-2008, 12:15 PM #3
Re: How best to measure compressor run time?
As Plank says use a hours run meter.
A long time ago I made up a box with x2 hour run meters in. One records the 'Total time' the other records 'running time'.
You record the dials at the beginning, and at the end....you do not have to worry about an exact number of hours, days, weeks etc as you have the 'total' hour meter to give you that.
Simple maths then gives you % figure or run time / 24hrs.
Keep it Simple!
-
16-07-2008, 04:45 PM #4
Re: How best to measure compressor run time?
Do as they say but if the compressor has internal overload add a current relay so that if the overload trips you cut the supply to the meter.
-
20-07-2008, 09:19 PM #5
Re: How best to measure compressor run time?
Just get an analog clock, set it to 12:00, and connect it in parallel with the compressor (using a voltage converter if needed).
"If Hannah was an air handler, I would be a condensing unit so I could open her TXV and pump my refrigerant through her coils." - a HVAC friend of mine
-
27-07-2008, 05:37 PM #6
Re: How best to measure compressor run time?
If you use the data logger which measures all parameters then it will be simple as well as fruitfull also.......
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
Leak Testing?
By Thana in forum Trouble ShootingReplies: 36Last Post: 31-08-2010, 02:57 PM -
TK basic micro-p features and functions
By REEFER-TEK in forum TransportReplies: 0Last Post: 05-12-2007, 06:25 PM -
what do you do on your off time?
By Tycho in forum Chit Chat & Service StoriesReplies: 15Last Post: 09-10-2006, 12:03 AM -
Time delay for multi compressors
By iceman007 in forum Air ConditioningReplies: 5Last Post: 06-11-2004, 08:05 AM