Results 1 to 6 of 6
Thread: Greetings...
-
08-07-2008, 01:04 AM #1
Greetings...
I'm Gary out of the Kansas City local, always
looking for a place learn from others experience.
I'll share anything I know from 33yrs in the biz,
no I'm not done working, I just turned 50. I'll
be around awhile yet.
Being a pipefitter has been a fascinating career,
no other trade does as much of their own design
work as we do.
We are the ones that have to make it work....
Time to start searching about r-407c now...
-
08-07-2008, 01:22 AM #2
Re: Greetings...
Im new here too and "the elders" should give you the official welcome ... anywah welcome!
You can get ifo on R407c from all over this forums if you use the search in your toolbar ... and also from here:
http://www.refrigerants.dupont.com/S...cts/index.html
-
08-07-2008, 03:23 AM #3
Re: Greetings...
Welcome Gary.
Do you work out of a hall or lucky enough to have permanent residence at a shop?
What type of pipe fitting do you do? Ammonia, water, etc? Or just ***** stuff?If all else fails, ask for help.
-
08-07-2008, 11:43 AM #4
Re: Greetings...
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
08-07-2008, 10:02 PM #5
Re: Greetings...
Gary, you already had a welcome from the US and Croatia, now from Belgium.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
08-07-2008, 11:22 PM #6
Re: Greetings...
and welcome Gary from the UK.
Hope that you enjoy the forum.Brian - Newton Abbot, Devon, UK
Retired March 2015