Results 1 to 7 of 7
Thread: oil for NH3
-
25-06-2008, 06:42 AM #1
regular poster
- Join Date
- Nov 2007
- Location
- India
- Age
- 46
- Posts
- 74
- Rep Power
- 17
oil for NH3
Is there any synthetic oil which is soluble with NH3 at low temperature.
raj
-
25-06-2008, 11:23 AM #2
VIP Poster
- Join Date
- May 2007
- Location
- India
- Posts
- 688
- Rep Power
- 17
Re: oil for NH3
You May Not Get Soluble Oil , But Can Get A Good Synthetic Oil From Yale Industries. Does Not Blacken At High Discharge Temp.
-
25-06-2008, 12:48 PM #3
Moderator
Site Moderator : and general nice guy
- Join Date
- Jan 2006
- Location
- Norway
- Posts
- 1,035
- Blog Entries
- 4
- Rep Power
- 31
Re: oil for NH3
Reflo 68 is a good choice
http://www.lubricantsplus.co.nz/pdf/IM7861e.pdf-Cheers-
Tycho
-
25-06-2008, 01:06 PM #4
VIP Poster
- Join Date
- Aug 2007
- Location
- Adelaide Australia
- Age
- 70
- Posts
- 562
- Rep Power
- 24
Re: oil for NH3
CPI make a good synthetic oil, also Castrol Icematic and Eexon Zerice.
-
25-06-2008, 02:03 PM #5
VIP Poster
- Join Date
- May 2007
- Location
- Auckland
- Age
- 74
- Posts
- 3,357
- Rep Power
- 37
Re: oil for NH3
Mobil do SHC 226 and SHC 426, depending on evap temps. Frigoscandia also do a low temp synthetic as well.
magoo
-
02-07-2008, 05:03 AM #6
regular poster
- Join Date
- Nov 2007
- Location
- India
- Age
- 46
- Posts
- 74
- Rep Power
- 17
Re: oil for NH3
I have seen the literature where mentioned that PAG is soluble in Ammonia. But iam not sure. Can any one suggest.
I want to use this oil for DX ammonia system.
I am attaching the literature as well
raj
-
03-07-2008, 07:24 AM #7
VIP Poster
- Join Date
- May 2007
- Location
- India
- Posts
- 688
- Rep Power
- 17
Re: oil for NH3
Interesting article on Soluble oils for sure.
