Results 1 to 9 of 9
-
19-06-2008, 01:38 PM #1
How to design a capillary tube for the R134a?
Hello, everyone! Who can help me how to design a capillary tube for the R134a? Could you supply some information such as data or table to me?
thank you very much!
Crystal
-
19-06-2008, 02:03 PM #2
Re: How to design a capillary tube for the R134a?
Hello! You may use the program from Danfoss
http://www.danfoss.com/NR/rdonlyres/...0/dancapv1.exe
-
19-06-2008, 02:27 PM #3
Re: How to design a capillary tube for the R134a?
Hello,dear!
thank you very much!!
that is very useful to me, thank you again.
In addition, can you supply some table for select the captube? Now I am writing a book, I want to provide some diagram for the reader to design a captube conveniently.
Best wishes!
Crystal
-
19-06-2008, 05:31 PM #4
-
19-06-2008, 05:31 PM #5
Re: How to design a capillary tube for the R134a?
Capillary chart for r134a
http://www2.the-acc-group.com/java/X...4a&applic=HMBPTransvestites are men who like to eat, drink, and be Mary.
-
20-06-2008, 02:57 AM #6
Re: How to design a capillary tube for the R134a?
to philfridge:
Thank you vary much. Now I am studing the file which you suppied for me.
Best wishes!
Crystal
-
20-06-2008, 04:15 AM #7
Re: How to design a capillary tube for the R134a?
to philfridge:
what is the meaning of LBP and HMBP respectively? why does the table show that the return gas superheated up to 35 °C ? I think this temperature is too high, am I right?
looking for your return.
Crystal
-
20-06-2008, 01:49 PM #8
Re: How to design a capillary tube for the R134a?
LBP stands for Low Back Pressure, freezer applications
HMBP = High Medium Back pressure : Cooling and AC application.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
21-06-2008, 09:41 PM #9
Similar Threads
-
capillary tube design
By Chris Zahrt in forum FundamentalsReplies: 5Last Post: 04-06-2009, 09:16 PM -
Distributor & Capillary tube position
By MrReds in forum Technical DiscussionsReplies: 12Last Post: 29-03-2008, 07:40 AM -
metric capillary tube
By tralex in forum FundamentalsReplies: 5Last Post: 21-02-2006, 06:57 AM -
R134a <-> liquid heat exchanger design
By DaBit in forum Technical SpeculationsReplies: 19Last Post: 10-05-2002, 08:36 AM