Results 1 to 18 of 18
Thread: SAB 202 LM Part
-
18-06-2008, 05:19 PM #1
SAB 202 LM Part
I am having difficulty locating this part for a SAB 202 LM, the part number is 1112.112.101. I would like to get it in the USA if possible, if not overseas will have to do. Does anyone have a contact besides M&M Refrigeration in the USA or a contact overseas?
-
18-06-2008, 08:40 PM #2
Re: SAB 202 LM Part
NH3 WIZARD.
It might be worth trying 1 of the Frick sales offices listed in the link below.
As Sabroe is a sister Company of theirs. (J.C.I.)
If all else fails I can provide you with a UK address.
Let us know how you get on?
Cheers Grizzly
ps. The Florida office would be a good start!
http://www.frickcold.com/salesoffice.aspLast edited by Grizzly; 18-06-2008 at 08:53 PM. Reason: addendum
-
18-06-2008, 09:13 PM #3
Re: SAB 202 LM Part
Thanks Grizzly< I should have mentioned I have been in contact with JCI in Denmark and he is trying to help, the US guys referred me to him due to it being a SAB 202LM. I will let you know how I make out.
And Google didn't help locating this part
-
18-06-2008, 09:43 PM #4
Re: SAB 202 LM Part
Demark is a good start.
I have just checked and there is a definite link between Frick and Sabroe in the USA.
Incidentally what is that part number related to?
I have ALL the 202 parts manuals and can find no number matching the one you post.
I have a site with both sab 202 LM's and SM's.
Cheers Grizzly
-
18-06-2008, 10:37 PM #5
Re: SAB 202 LM Part
nh3wizard,
will help JCI USA, part is RTV 22,0x1,5 ST35,4 DIN 2391,L=658 EN 50049-2.2 ?, and in Denmark isnīt on store.
-
19-06-2008, 02:23 PM #6
-
19-06-2008, 02:45 PM #7
Re: SAB 202 LM Part
that's part 1112.112-101
-
19-06-2008, 07:00 PM #8
Re: SAB 202 LM Part
Yes, part # 1112.112.101 was what I was told, so I will search for 1112.112-101
-
19-06-2008, 08:39 PM #9
Re: SAB 202 LM Part
nh3 wizard, Ok, serch Best regard Josef.
-
20-06-2008, 06:10 PM #10
-
20-06-2008, 08:14 PM #11
Re: SAB 202 LM Part
Oh, no you specialist, only write what are you looking for.
-
21-06-2008, 11:24 PM #12
-
22-06-2008, 12:27 AM #13
Re: SAB 202 LM Part
I think if you said what the part is it would help as well as part No it would help.
-
22-06-2008, 07:52 AM #14
Re: SAB 202 LM Part
nh3wizard,
I'm sorry, I much zealous and doesn't know English
-
22-06-2008, 11:11 PM #15
Re: SAB 202 LM Part
I am in contact with Johnson controls in the U.S.A., as soon as I get more information from them, I will let all know. The part is a oil line.
-
23-06-2008, 07:28 AM #16
Re: SAB 202 LM Part
NH3 Wizzard
can you give me the drawing position number ,and just a suggestion if it's external 10mm/12mm oil way then bend a new piece yourselfs .
Regards
Torque.
-
23-06-2008, 10:01 AM #17
Re: SAB 202 LM Part
Hello NH3 wizard,
Details for part number 1112.112-101RTV Ø22,0x1,5 ST35.4 DIN 2391, L=658 EN 50049-2.2
In stock:No
Here is a print out of the JCI site in Denmark. As you can see it's not in stock.
But you can order or ask for a quotation thru JCI in USA.
Greetings bart.
-
23-06-2008, 07:42 PM #18
Re: SAB 202 LM Part
Thanks Bart Nabbe for the information, and torque I was tring to avoid having to buy a 10 ft section of metric pipe, but thanks for the suggestion.
Similar Threads
-
part p
By eggs in forum ElectricalReplies: 25Last Post: 15-11-2007, 08:55 PM -
Have I replaced the right part ?
By fridge doctor in forum Air ConditioningReplies: 5Last Post: 15-11-2007, 08:38 PM -
Filter-drier part number question
By Larry2 in forum FundamentalsReplies: 4Last Post: 24-11-2006, 05:46 PM -
Looking for air temp sensors for Toshiba GR334 fridge (have part number)
By Cluster in forum DomesticReplies: 1Last Post: 19-02-2006, 12:08 AM -
Part P
By eggs in forum Legal-Business-MarketingReplies: 1Last Post: 11-07-2005, 09:27 AM