Results 1 to 20 of 20
Thread: Dixell Controller Parameters
-
18-06-2008, 04:09 PM #1
I have a client who has just bought a bottle cooler. He knew it wasnīt working whe he bought it and asked me to have a look. I think someones not paid a bill or something because every parameter in the controller has been set to maximum value (including set point). So now im trying to work out what all the parameters do. The model of the controller is XR20C. I had a look on The Dixell site but couldnīt find that particular model, but I did find a similar one, which had some of the same parameters, so now I know what 25 out of the 41 parameters,
Can anybody help me with the remaining ones, please?
Hereīs what I dont Know,
LOD
AGC
tiC
iAG
AGt
APO
ALP
Thanks,
paulLast edited by airefresco; 23-06-2008 at 06:07 PM.
-
18-06-2008, 04:45 PM #2
Re: Dixell Controller Parameters
Go to www.dixell.com , register and download the papers you need
-
18-06-2008, 05:06 PM #3
Re: Dixell Controller Parameters
I've already done that before posting, But I can't find the info for this particular model. I found a similar model, which has some of the same parameters.
I just looked again, just to be sure, and managed to find a list of all the parameters, but It's in Italian and doesn't give a detailed description of what each one does. For example, most of the parameters are just numbers but some are letters or codes, so I can't work it out without knowing exactly what they mean.
-
18-06-2008, 05:24 PM #4
Re: Dixell Controller Parameters
you make me go down to van........
I will get them for you
-
18-06-2008, 05:44 PM #5
Re: Dixell Controller Parameters
You got the parameters wrong,
Here is the page scanned
Good luck
-
18-06-2008, 07:54 PM #6
Re: Dixell Controller Parameters
Did a quick check on Dixell site and yes the first download of the XR20C parameter list was in Italian. So I clicked the 'English' flag and got the English version.
It didn't have example settings though, just the descriptions of the parameters.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
18-06-2008, 08:23 PM #7
Re: Dix ell Controller Parameters
Following on from everyone else's help and advise.
I have posted these pages.
Hopefully they are of use.
As they are slightly different from chemi-cool's
Cheers Grizzly
-
18-06-2008, 09:13 PM #8
Re: Dixell Controller Parameters
See how easy this an be Airefresco.
The magic word for this is GoogleIt's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
18-06-2008, 10:20 PM #9
Re: Dixell Controller Parameters
Thanks for the info, that is exactly what I needed.
If I click on that English flag, then the page goes back to the start. Anyway, doesnīt matter now, because the one Grizzy posted will suffice. The one Chemi posted, I donīt think thereīs enough parameters on that, but ill take to site anyway, just in case.
Thanks Again
-
22-06-2008, 07:46 PM #10
Re: Dixell Controller Parameters
The saga continues,
Went back to site on Friday with the codes that were posted. Apologies to Chemi, because the list you gave was actually very usefull. I went through the codes and there are still 17 codes that are not in either of the 2 manuals posted. All the other codes are now set to factory defaults, while I try and get the thing to work. At the minute it just flashes the compressor light.
I was thinking that maybe there is some kind of hidden menu or something that gives you access to some new codes? Would anybody know anything about this.
Another thing is that the rEL value is 3. This i assume is the software version, which I believe should be 4. Does this make a difference?
Iīve updated the first post with the codes that are on the controller but not on either of the 2 lists I now have. If anyone could share some light on these, I would be very grateful, as I donīt really want to replace a controller just for a couple of codes been set wrong.
-
22-06-2008, 07:51 PM #11
Re: Dixell Controller Parameters
In any of the manuals does it tell you how to reset to factory settings?
I wouldnt have thought a bottle cooler needed any special setup.Just set the setpoint and away you go.If it ain't broke, it doesn't have enough features yet.
Damo
-
22-06-2008, 08:04 PM #12
Re: Dixell Controller Parameters
Have a look at this pdf file originally posted by Brian_uk many moons ago
http://dixell.com/linea58/download/XW271L_E.PDF
It shows a few of the parameters that you are missing.Hope it helps.Its for an XR20 controller.If it ain't broke, it doesn't have enough features yet.
Damo
-
22-06-2008, 08:13 PM #13
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Dixell Controller Parameters
-
22-06-2008, 08:57 PM #14
Re: Dixell Controller Parameters
Funny\strange how all the parameters aren't the same yet they are for the same controller.....
-
22-06-2008, 09:49 PM #15
Re: Dixell Controller Parameters
Cheers, Iīm sure iīll be able to get all the codes now with all the info posted.
iīve only had a quick look through the manual Nike123 posted (Thanks BTW) but the 40C and 60C look like what I have, so Iīm thinking maybe someone has updated the controller with the wrong software.
anyway, cheers again
-
23-06-2008, 06:22 AM #16
Re: Dixell Controller Parameters
Even if someone should have updated with new software - I don't see how this can be done by a 'normal' user - the parameters stays the same, only some are added.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
23-06-2008, 03:58 PM #17
Re: Dixell Controller Parameters
I've looked at the manual properly now and gone through every model to find this missing codes. I am only short of 7 codes, but there is a code that gives you factory defaults of all the parameters, so i'm going to try this. Hopefully that will do the trick and I can just leave the ones I don't know at the factory default value.
I've changed my mind now on someone changing the software, because there doesn't seem to be model with the exact same parameters.Last edited by airefresco; 23-06-2008 at 06:08 PM.
-
10-12-2008, 08:29 AM #18
Re: Dixell Controller Parameters
Hi,
Replace the controler for the sake of Ģ70 is it worth all your efforts
-
10-12-2008, 10:39 AM #19
Re: Dixell Controller Parameters
Dear airefresco.
please go to the second level of the parameters in the document and u will find what u need.
best regard.
-
08-01-2009, 12:33 PM #20
Re: Dixell Controller Parameters
I know this is a little and a little too late but, I am the distributor for Dixell in North and South America. Any time the list of parameters has added options, i.e.; parameters that cannot be found on any parameter sheet the control has become inoperable. One of the indications as to a short caused by water is if the control shows 31 degrees F or C constantly... Also if you request to be contacted Dixell will proptly have some contact you generaly in less that 24 hours...
Similar Threads
-
Carrier Transicold Container Problem
By Shamel in forum TransportReplies: 39Last Post: 23-01-2012, 11:23 PM -
Daikin controller
By mchild in forum Air ConditioningReplies: 8Last Post: 02-10-2009, 07:14 PM -
Danfoss EKC201C controller parameters
By abd.koj in forum Supermarket RefrigerationReplies: 3Last Post: 23-03-2008, 10:25 PM -
Controller wiring
By Mickvee in forum Air ConditioningReplies: 2Last Post: 30-12-2005, 02:04 AM -
Fan Controller
By Abe in forum Trouble ShootingReplies: 4Last Post: 12-01-2002, 02:21 AM