Results 1 to 1 of 1
-
28-10-2003, 01:53 AM #1
Freezer Potential Relay not staying open
I just got a new 3/4 HP 120volt compressor for a freezer. However the relay tries to close every 2 seconds or so over and over again. By doing this it continually is trying to engage the S side of the compressor. There is a Start capacitor before the relay but it doesn't seem to keep sufficient voltage for the relay to stay open.
The relay is rated is listed on this page.
http://www.jard.com/prelays.htm model jpr-63
Please help.
dave
Similar Threads
-
voltage drop on relay
By Temprite in forum ElectricalReplies: 4Last Post: 30-01-2006, 07:55 PM -
Potential Relay not staying open
By labrosse in forum Technical SpeculationsReplies: 4Last Post: 05-08-2005, 08:14 PM