Results 1 to 3 of 3
Thread: AC&R oil regs
-
08-06-2008, 01:13 PM #1
AC&R oil regs
I have a chance to change some old oil regs on a two compressor system. Should i go for automatic or manual screw adjust. The old auto's don't really fill very high in the sight glass ,they are quite old though. I feel that having an input into the oil level would be preferable. Thanks
Put the screwdriver down and step away from the expansion valve !!!! OK Gary i won't touch it unless instructed.
-
08-06-2008, 03:14 PM #2
Re: AC&R oil regs
Hi - generally a third of a sight glass is sufficient.
-
08-06-2008, 05:22 PM #3
Re: AC&R oil regs
Thats what these auto's give, ok they seem to work ok so i'll maybe stick to autos Thanks
Put the screwdriver down and step away from the expansion valve !!!! OK Gary i won't touch it unless instructed.
Similar Threads
-
Heat Load Calculations - Part L Building Regs
By Refrigerologist in forum Tools and CalculatorsReplies: 6Last Post: 12-03-2008, 09:53 AM -
Fresh air, building regs 10 l/s per person
By Andy W in forum Air ConditioningReplies: 12Last Post: 10-01-2008, 07:01 PM -
f gas regs and prv
By mgtet in forum Legal-Business-MarketingReplies: 10Last Post: 02-07-2007, 07:57 PM -
F Gas regs - "disproportionate cost"
By djbe in forum Legal-Business-MarketingReplies: 23Last Post: 17-12-2006, 06:49 PM -
Scaffolding Regs
By Abe in forum Legal-Business-MarketingReplies: 0Last Post: 19-11-2005, 04:57 PM