Results 1 to 11 of 11
Thread: Cap Tubes
-
06-06-2008, 12:53 PM #1
Cap Tubes
Is there any charts or software to calculate the length for cap tubes
-
06-06-2008, 03:44 PM #2
Re: Cap Tubes
Hello
you can use the software of Tecumseh
by
-
06-06-2008, 05:10 PM #3
Re: Cap Tubes
Please leave your email in my PM and I will mail you some useful info.
Chemi
-
06-06-2008, 10:31 PM #4
Re: Cap Tubes
Ours is a world of nuclear giants and ethical infants. If we continue to develop our technology without wisdom or prudence, our servant may prove to be our executioner.
-
06-06-2008, 10:56 PM #5
Re: Cap Tubes
You could also try Danfoss's Cap Tube Software - DanCap.
Download here (4mb)
http://compressors.danfoss.com/selec...ware_index.htmBrian - Newton Abbot, Devon, UK
Retired March 2015
-
09-06-2008, 10:24 PM #6
Re: Cap Tubes
Thanks for all the info
-
11-06-2008, 08:11 AM #7
-
16-07-2008, 08:26 PM #8
Re: Cap Tubes
Were I can find a gage to identify inner diameters for capilary tubes?
Is there a realtion with the outside diameter?
-
17-07-2008, 01:18 PM #9
Re: Cap Tubes
JB industries and Refco both make one.
-
08-03-2009, 08:51 AM #10
Re: Cap Tubes
thanks for the software and the pdf, cool the heat
-
27-09-2009, 09:19 PM #11
Re: Cap Tubes
thanku very much for information
Similar Threads
-
What kind of tubes to use???
By Sanel in forum FundamentalsReplies: 7Last Post: 05-01-2007, 01:03 PM -
capillary tubes
By JimmyMurphy in forum FundamentalsReplies: 2Last Post: 24-06-2006, 07:49 AM -
Obstructed Capillary Tubes
By terrygoodrich in forum Trouble ShootingReplies: 9Last Post: 17-03-2005, 02:48 PM -
reduce thickness of bended copper tubes
By rlim in forum Air ConditioningReplies: 4Last Post: 08-07-2003, 10:58 PM -
capillary tubes and mass flow when fed with liquid/gas
By DaBit in forum FundamentalsReplies: 15Last Post: 24-10-2002, 06:52 PM