Results 1 to 5 of 5
Thread: Trane chiller
-
05-06-2008, 07:28 PM #1
Trane chiller
Hi all
Went to work on a trane chiller today model No ERTAA 324 serial No EKJ4607. Was going to replace all the drier cores. On site engineer enabled BMS to run chiller and pumps.
When i got to the chiller it was not running and on the display was the message No Communication, No Valid Data.
Checked voltages and signals on the comms modules also checked fuses all seemed ok. Has anyone experienced this prob or point me in the right direction
cheers
-
06-06-2008, 06:14 PM #2
Re: Trane chiller
not to worry sorted
-
09-06-2008, 11:14 AM #3
-
18-06-2008, 03:55 PM #4
Re: Trane chiller
what was the problem ? did u replace module ?
-
13-11-2009, 03:51 PM #5
Re: Trane chiller
This problem happens when a setting is not correct or any module not provide information to the main module
Similar Threads
-
York & Trane Reciprocating Chiller
By Gigas in forum Air ConditioningReplies: 3Last Post: 21-05-2008, 12:21 AM -
Trane Chiller manual
By PaulZ in forum Industrial CompressorsReplies: 2Last Post: 19-02-2008, 09:14 AM -
Trane Chiller low temperature operation
By Brads in forum IndustrialReplies: 2Last Post: 20-01-2008, 07:18 AM -
Connecting Trane Water chiller to air handling unit
By celtictech in forum FundamentalsReplies: 10Last Post: 08-03-2007, 06:14 PM -
trane chiller
By ric in forum Air ConditioningReplies: 3Last Post: 14-09-2006, 08:03 PM