I bought a used freezer, and it all looks nice, but it won't get very cold. Now I know this is a pretty general problem, so I'll provide as many details as possible to try and narrow it down. It's nothing electrical - the compressor is getting power and both fans run. The defrost coil isn't stuck on or anything like that either. It will run non-stop, and only get down to about 35 degrees F. I noticed that the evaporator coils only get really cold and frosty near the capillary tubing... Maybe approximately the closest 6 or 8 inches. I'm unsure of what this may mean though. Is it low on *****? (It takes R404A). It has saddle vales on the high and low side, that I can tell were added after manufacturing... Maybe they had problems before?

http://i108.photobucket.com/albums/n...5/HPIM4302.jpg
http://i108.photobucket.com/albums/n...5/HPIM4291.jpg
http://i108.photobucket.com/albums/n...5/HPIM4293.jpg
http://i108.photobucket.com/albums/n...5/HPIM4294.jpg

Thanks!

-Spenser