Results 1 to 4 of 4
Thread: Direct Driven Chillers
-
15-05-2008, 10:39 AM #1
Direct Driven Chillers
Hi,
I am currently looking at various options to supply electricity, desalinated water and district cooling to buildings with gas as the primary fuel. One of the options is to generate electricity and use waste heat for desal (which is BaU) and to use vapour compression chillers direct driven by either steam or gas turbines. We have seen steam-driven VC chillers at a facility in Japan, so know that they are used for district cooling.
Does anyone have any practical experience with direct driven chillers? In particular, we are interested in the conversion efficiencies of gas or steam turbines in the order of 6MW in capacity.
Thanks
-
15-05-2008, 10:48 AM #2
Re: Direct Driven Chillers
Hi James
I have seen YORK equipment driven by alternative primary supplies such as steam, but have no direct knowledge myself.
Speak with the big chiller manufacturers they should be able to assist you further.
Sturt.
-
16-05-2008, 06:40 PM #3
Re: Direct Driven Chillers
James
Good question, have you contacted anyone yet. if not i could pass a few names onto you.
I know they would love a trip to where your talking about.
-
16-05-2008, 10:56 PM #4
Re: Direct Driven Chillers
How much capacity are we talking about and how hot water/steam will be there?
Similar Threads
-
centrifugal chillers york
By Magic in forum Technical DiscussionsReplies: 6Last Post: 12-11-2009, 06:08 PM -
Air cooled chillers vibration isolation
By vijay_study in forum Air ConditioningReplies: 3Last Post: 06-10-2009, 08:53 PM -
Thumb rule for belt driven compressor - Power loss
By smpsmp45 in forum NH3Replies: 4Last Post: 27-09-2007, 09:26 AM -
Instant water chillers - ammonia recirculation systems
By lraja in forum NH3Replies: 2Last Post: 21-02-2007, 10:00 PM -
Chillers versus packs
By Peter_1 in forum Technical SpeculationsReplies: 15Last Post: 17-01-2004, 09:48 PM