Results 1 to 3 of 3
-
13-05-2008, 07:27 PM #1
How I should do to recovery oil in a new NH3 installation ( automatic system )
I kindly ask you for technical information about the options that we could have to recovery oil in a new NH3 installation ( automatic system )
I will be really appreciate if you could let me know the options availables.
Best regards,
Fernando
-
13-05-2008, 07:34 PM #2
Re: How I should do to recovery oil in a new NH3 installation ( automatic system )
Can you give us more information on the system; compressor type, what kind of defrost you use. The more information you give us the better off you will be.
Can you turn on your private messaging option if you have it.Last edited by nh3wizard; 13-05-2008 at 07:44 PM. Reason: Can not PM
-
14-05-2008, 03:03 AM #3
Re: How I should do to recovery oil in a new NH3 installation ( automatic system )
Think of the process required to do this manually. Then all you have to is automate the same process.
If all else fails, ask for help.
Similar Threads
-
Leak Testing?
By Thana in forum Trouble ShootingReplies: 36Last Post: 31-08-2010, 02:57 PM -
complete System Recovery
By absolute-zero in forum Computers & the InternetReplies: 9Last Post: 20-01-2008, 07:03 PM -
Linde Pack, Oil recovery system.
By buddy in forum Supermarket RefrigerationReplies: 26Last Post: 05-01-2007, 04:04 AM -
Oil Recovery System - HELP!
By manuelcm in forum Technical DiscussionsReplies: 10Last Post: 11-08-2006, 05:35 PM