Results 1 to 8 of 8
Thread: Heat Load Calculations
-
08-05-2008, 12:56 PM #1
Heat Load Calculations
Dear All,
Hereby i enclosed a format to calculate Heat load.
Try it.If there is any mistakes pls inform me.
regards,
TJK
-
08-05-2008, 02:11 PM #2
Re: Heat Load Calculations
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
10-05-2008, 08:14 AM #3
-
10-05-2008, 08:46 AM #4
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Heat Load Calculations
Where is moisture of fresh air in calculation?
Where is calculation of heat gain from peoples, equipment (fork lift), fans, lights and any other possible load? It is unclear to me how you got that 0,20 coefficient in this formula Qd =0,20 x (Qk+Qe) and what conduction heat and infiltration heat have got to do with "other heat gain".
Where is pull-down time? Is it 24 hr maybe?Last edited by nike123; 10-05-2008 at 09:26 AM.
-
10-05-2008, 09:26 AM #5
Re: Heat Load Calculations
This format is only for after freezing(Frozen Foods).No need to calculate heat load before freezing.This is my opinion.
comments welcome.
TJK
-
10-05-2008, 05:57 PM #6
Re: Heat Load Calculations
I'm not sure why you would not calculate the sensible load down to freezing. This is part of the load also.
If all else fails, ask for help.
-
10-05-2008, 06:31 PM #7
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
-
11-05-2008, 02:24 AM #8
Re: Heat Load Calculations
That could be nike123. But why have a special calculation? Someone else may see this and think...that's alll I need.
If all else fails, ask for help.
Similar Threads
-
Capacity control
By sparrow in forum TrainingReplies: 44Last Post: 18-01-2010, 07:49 PM -
Some information on the aplication of suction gas/liquid line heat exchangers
By SteinarN in forum FundamentalsReplies: 5Last Post: 14-09-2009, 07:33 AM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
frostles heat pump
By Lc_shi in forum New TechnologiesReplies: 27Last Post: 31-03-2008, 07:53 AM -
Heat Load Calculations - Part L Building Regs
By Refrigerologist in forum Tools and CalculatorsReplies: 6Last Post: 12-03-2008, 09:53 AM