Results 1 to 13 of 13
Thread: Mycom F62WB Compressor
-
29-04-2008, 03:39 AM #1
Mycom F62WB Compressor
Hi guys,
Hope someone may be able to help with some info on the following compressor.
Make : Mycom
Model: F62WB
Refriegrant: R22
Rpm: 1400
Require capacity mainly.
Thanks in advance.
dsp
-
29-04-2008, 03:52 AM #2
Re: Mycom F62WB Compressor
Hi dsp
Best thing is to contact Mycom in Sydney and ask for Clive, I am pretty sure he will be able to help you.
Paul
-
29-04-2008, 04:03 AM #3
Re: Mycom F62WB Compressor
Thanks Paul
Ill give him a go.
dsp
-
29-04-2008, 06:37 AM #4
Re: Mycom F62WB Compressor
Hi dsp,
from Mycom performance data i got as follows :
MYCOM F62WB @Te-40'C/Tc+35'C and speed 1200 rpm is 91,400 kcal/hr with motor 90 kw.
And for model with WB max speed is 1,200 rpm.
For model F62WA you can run with 1,400 rpm. Cooling capacity at Te-40'C/Tc+35'C is 41,600 kcal/hr w/ motor 55kW
-
29-04-2008, 07:12 AM #5
Re: Mycom F62WB Compressor
Thanks heaps Maguro!!!
-
29-04-2008, 12:04 PM #6
Re: Mycom F62WB Compressor
Hi dsp
For capacity should be know what Te and Tc, so we can help you.
-
18-05-2008, 05:28 AM #7
Re: Mycom F62WB Compressor
hi dsp,
i learn from our local mycom office that most of their published doc has Tc in +35c.
2ndly, the comp can be either direct drive or belt drive. the rpm will be different.
but, i learn in australia there few mycom related companies have such info. again, you gain some & sacrifice some.
hendry, on wesak day holiday.Hendry
"What uncertainty means to you, and you only?"
-
18-05-2008, 01:32 PM #8
Re: Mycom F62WB Compressor
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
23-05-2008, 12:07 PM #9
Re: Mycom F62WB Compressor
josip, your chart looks incorrect to my information.
I see a mycom 8WB R22 1200RPM AT 765M3/HR
-
01-06-2008, 06:48 PM #10
Re: Mycom F62WB Compressor
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
02-07-2008, 11:19 PM #11
Re: Mycom F62WB Compressor
If you are running this poor thing at 1400 that is 200RPM over stated Max
Here is a basic run at 1200RPM
DATE 07-02-2008
REFRIGERANT AMMONIA
MODEL N62WB
CAPACITY [kW] 325.8
CAPACITY [TR] 92.6
ABSORBED POWER [kW] 85.4
SPEED [Rpm] 1200
LOAD [%] 100
CONDENSING TEMP. [degC] 32.2
EVAPORATIVE TEMP. [degC] -12.2
SUCTION SUPERHEAT [degC] 0.00
INTERMED SUPERHEAT [degC] 0.00
LIQUID APPROACH TEMP. [degC] 5.00
LIQUID SUBCOOLING [degC] 5.00
SUCTION TEMP.(1ST) [degC] -12.2
SUCTION PRES. [MPaA] 0.266
DISCHARGE PRES. [MPaA] 1.24
SUCTION PRES.LOSS [MPaA] 0.000
DISCHARGE PRES.LOSS [MPaA] 0.000
SWEPT VOLUME(2ND) [m3/h] 191
SWEPT VOLUME(1ST) [m3/h] 573
INTERMED TEMP. [degC] 21.9
SUCTION TEMP.(2ND) [degC] 21.9
DISCHARGE TEMP(2ND) [degC] 53.9
DISCHARGE TEMP(1ST) [degC] 89.3
INTERMED PRES. [MPaA] 0.913
REFRIG. FLOW RATE(2ND) [m3/h] 143
REFRIG. FLOW RATE(INT.) [m3/h] 22.3
REFRIG. FLOW RATE(1ST) [m3/h] 477
REFRIG. FLOW RATE(2ND) [Kg/h] 1203
REFRIG. FLOW RATE(INT.) [Kg/h] 155.9
REFRIG. FLOW RATE(1ST) [Kg/h] 1047
OIL HEAT REJECTION [kW] 4.00
INTERMED HEAT REJECTION [kW] 50.0
JACKET HEAT REJECTION [kW] 14.0
COP [-] 3.82
--- SUPERHEAT in not counted in refrigeration capacity ---
--- WITH WATERCOOLED OIL COOLER ---
--- WITH LIQUID SUBCOOLER ---
REFRIG. FLOW RATE [m3/h] 0.18
REFRIG. FLOW RATE [Kg/h] 1.27
HEAT REJECTION [kW] 0.41
--- WITH INTERMED. GAS-COOLER ---
REFRIG. FLOW RATE [m3/h] 22.1
REFRIG. FLOW RATE [Kg/h] 154.6
HEAT REJECTION [kW] 49.6
--- WITHOUT SIDE LOAD EVAPORATOR ---
If Clive has not replied just post the actual run conditions and I will repost the chart.
Hey Josip that Chart looks off I would not go by it, you can always ask a Mycom rep to do a run any any machine.
Iceman_400Refrigeration is not just cool, it is my life.
-
03-07-2008, 04:55 AM #12
Re: Mycom F62WB Compressor
Dear Ice man the guy is looking for ***** compressor and u had posted the details of compressor with ammonia.
Please see the attachment.
raj
-
08-07-2008, 07:26 PM #13
Re: Mycom F62WB Compressor
Awesome looks like you got the answers you needed.
Refrigeration is not just cool, it is my life.
Similar Threads
-
Testing Inverters
By fridge doctor in forum Air ConditioningReplies: 38Last Post: 15-06-2011, 06:52 AM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
SL/SB-400 Pump Down Procedures
By absolute-zero in forum TransportReplies: 1Last Post: 29-01-2008, 09:27 PM -
Different between compressor MYCOM single stage and compressor booster
By thien nhat in forum CommercialReplies: 7Last Post: 13-12-2007, 06:31 PM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM