Results 1 to 3 of 3
Thread: Oil sump temperature
-
28-04-2008, 09:55 PM #1
Oil sump temperature
I am trying to start our chiller York Millennium model YTG0A3B2-CGJ and find that the oil sump tempurature is not increasing to setpoint 125 it stay same around 70 any suggestion for troubleshooting the problem.
Thanks
-
28-04-2008, 11:26 PM #2
Re: Oil sump temperature
Check that the sump / Crankcase oil heater is working.
Also it is quite common where fitted to have the MCB supplying the heater fail.
Or if relevant its Cartridge Fuse blow.
In short my first suggestion would be that the relevant supply has been interrupted.
Secondly the heater may be U.S.
If necessary use a clamp meter to confirm!
Cheers Grizzly
Sorry the above is not strictly correct as a YT is a centrif!
I will get back with more once the archives have been consulted but the bulk may still be relevant!!!!Last edited by Grizzly; 28-04-2008 at 11:38 PM. Reason: I got my models mixed up.
-
29-04-2008, 05:05 AM #3
Re: Oil sump temperature
My wife used to say you never listen to a word I say at least I think that what she said
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
Thermo King OptiSet
By REEFER-TEK in forum TransportReplies: 4Last Post: 06-12-2007, 07:23 PM -
TK basic micro-p features and functions
By REEFER-TEK in forum TransportReplies: 0Last Post: 05-12-2007, 06:25 PM -
Q=? h1=? mechanical schematics
By fridg in forum Technical SpeculationsReplies: 22Last Post: 19-03-2006, 01:43 PM -
Article in ACH&R News
By Gary in forum FundamentalsReplies: 8Last Post: 20-05-2003, 12:27 AM