This is what the forums don for me !

[The MG Pony]

Thanks to all your guy's n Girls input and suggestions and ideas on my various projects I finally got a more refined design and assembly method for my little condensing units

And here is some pics of the newest with my crappy cam!

Electrical wiring box is water proof and the wire lugs are water tight.

The pressure safety cut off is manual reset (I want the problem fixed not ignored!)

For the cap tube to the valve I'll be putting on some tape foam to snuff out vibration, the bracket holding the valve isn't finished completely as you'll notice only one screw is holding it.


So what ya guys think?

[Brian_UK]

Looks pretty good there MG, what is/are they used for ?

[The MG Pony]

Kitchen gear, it is a 3K btu med temp unit, The compressor was origionaly R-12, but I get them with no oil, so they can be used with 134a or 401a(MP39)

[Grizzly]

And what looks like an SLR Bayonet is for?
Grizzly

[The MG Pony]

Oh my multiutility anti theft device I mostly keep it for show but when I can't find my wire strippers it does the job real good

[Brian_UK]

And what looks like an SLR Bayonet is for?
Grizzly

He uses that to stand the brazing rods in.

[The MG Pony]

He uses that to stand the brazing rods in.

You know, out of all the things that knife is great for I never thought of that! I think I'll do that!