Stal Screw

[GHAZ]

Hello guys i am in need of a service manual for S71 model.Can anybody help, thank you

[Bart Nabbe]

Not Digital,

What do you want to know ?

Greetings,

Bart.

[GHAZ]

Hello Bart Nabbe thankyou for your reply i need the thrust set up on screws and wear tolerances.

[Bart Nabbe]

Hello GHAZ,

I know some people from the STAL old days who started service up themselfs in Sweden.
They have a lot off parts and manuals and i'm sure that they can help you further on these things. I'm not from the STAL time so not realy on top of it.

Company in Sweden is Called:

Kompressorteknik Lindstrom AB.
Norrkoping, Sweden.

Paul Lindstrom, +46-11-100840.
He speaks English.

Greetings,

Bart.

[Josip]

Hi, GHAZ

Hello Bart Nabbe thankyou for your reply i need the thrust set up on screws and wear tolerances.

Please PM to me with your email address where to send data you need

Best regards, Josip

[SKviewtech]

Hello guys i am in need of a service manual for S71 model.Can anybody help, thank you

Hi, I can help, how do I contact you?

[Josip]

Hi, SKviewtech

Hi, I can help, how do I contact you?

Welcome to RE forums,... enjoy

... thanks for your good will for help, but this post is almost one year old

Best regards, Josip

[kentech]

Does anyone have a exploded view of a S57E?

[Valentino]

Hi all, i have s57 drawing in paper form if that helps. Easy comp. to overhaul. Can scan if required.

[avico]

Hi, GHAZ



Please PM to me with your email address where to send data you need

Best regards, Josip

Sir, How are you ? Long no see you online Skype
Have you reviceived my sms send from my mobile phone: +84 989 584 123 ???
Pls share it, my email: avicoengineering@gmail.com

Hi all, i have s57 drawing in paper form if that helps. Easy comp. to overhaul. Can scan if required.

Hi Valentino
Thanks much if you can share it

[cricri]

Hi Valetino and ghaz,
send me your adress I can send you
- exploded view of S57
- service manual for S71...in french(sorry)

[Richard C Green]

I have worked in the International Refrigeration Sector for 40 years. So I am one of the oldies.

I have worked all around the world at different times as Process and Machinery Designer and Commisioning Engineer for Companies Grasso/Grenco, York, Gram, Sabroe, Stal, and Sulzer, and I am also familiar with Linde, Frick, Dunham Bush, Howden, Hitachi, Carrier, Mycom, Kobe, Hall, Stern, Aerzen, Bitzer amongst others as third party product agreements. market Segments would be from Food and Dairy to Hydrocarbon Processing / Petrochemicals, and evrthing inbetween, including deep gold mine cooling in South Africa, Marine and Military applications etc.

The above would be back as far as the last of the first CO2, then R12, R22, R500, R13B1, NH3 etc, and up through the transitional and replacement refrigerants and oils of the 1980's/1990's Montreal Protocol, and up to the present reincarnation of Co2, continued use of NH3, and new refigerants R314a, R404 systems etc. I have also experience with Propane, Butane, Ethane systems with Oil Free compressors in the process Industry with applications 'minus' 100 Deg C up to + 90 Deg C heat pumps and low pressure steam on R114.

So ; why do I tell you all this - well, I still have some stories to tell and problem solving I can do for you guys, and possibly have some Documents on older Compressors and system components etc.

Over to you.

[NH3LVR]

Welcome to the Forum Richard.
I will look forward to your input. Jump in on a good debate!